Back to search

University of Minnesota

Three Routes to High Transference Number Lithium-ion Battery Electrolytes Using Lithium Bis(Nonenyl-Malonato) Borate

Abstract

dc:description.abstract

The power, safety, and efficiency of Li-ion batteries must be improved in order for grid-scale renewable energy storage to become viable, and the market share of electric vehicles to increase. A lithium metal anode and high voltage cathode pair can provide high power batteries, but in order for these high voltage electrode pairs to be used, a stable electrolyte must be designed that is electrically insulating, ion conducting, and solvates Li-ions well. The safety of Li-ion batteries can be improved by mitigating charge polarization, the separation of anions and cations in a cell under a bias. By decreasing the motion of the anion, charge polarization is reduced or eliminated and the lithium transference number (tLi+) can be maximized. tLi+ is the ratio of the current carried by Li+ to the total current in the cell, and increasing it not only improves the safety of Li-ion batteries but also the efficiency. This thesis will focus on three methods to increase tLi+ that incorporate the small molecule salt lithium bis(nonenyl-malonato) borate (LiBNMB).The first method uses acyclic diene metathesis (ADMET) polymerization to synthesize P(LiBNMB) of Mn = 2.7-55 kg/mol with Ð = 1.6-3.2. P(LiBNMB) and LiBNMB are highly electrochemically stable, up to 5.2 V versus Li/Li+, as measured by cyclic voltammetry. P(LiBNMB)/PC solutions, where the polymer had as few as 21 repeat units, reached tLi+ > 0.90 and showed no variance with molar mass, as measured by diffusion ordered spectroscopy (DOSY) NMR and potentiostatic polarization (PP). These solutions showed semi-dilute behavior, causing high tLi+ while maintaining σ = 0.31–0.39 mS/cm as measured by electrochemical impedance spectroscopy (EIS). The second method produced physically cross-linked solids via UV thiol-ene polymerization of LiBNMB and either 1,6-hexanedithiol (HDT) or tri(ethylene glycol) dithiol (TEGDT) in PC. At [LiBNMB] < 0.25 M, samples remain liquid after polymerization indicating a critical threshold must be reached before physical crosslinks are formed. Above 55 °C samples with [LiBNMB] > 0.5 M are transparent solids, with moduli on the order of 104 Pa and weak x-ray scattering, indicating ionic aggregates provide physical crosslinks. Samples with [LiBNMB] = 1.0 M and 1.5 M show Arrhenius behavior in conductivity indicating an ion-hopping mechanism enabled by ionic aggregates and reach 0.75 mS/cm at 93 °C, as measured by EIS. By creating a physically crosslinked solid, the electrode/electrolyte interface is more mobile, allowing for unusually high conductivity, while maintaining single ion conduction (tLi+ = 1) as measured by PP. The final method chain extends LiBNMB using 1,4-butanethiol (BT) via a UV thiol-ene click reaction to form LiBNMB-BT, which forms micellar solutions in DMSO and propylene carbonate (PC), with or without 10wt% decane. For all PC and PC with 10wt% decane (PC+dec) samples, and DMSO [LiBNMB-BT] > 0.25 M, the resulting solutions are above the critical micelle concentration (CMC) thus are composed of both free surfactant and micelles. PC+dec samples increase micelle curvature and thus ion dissociation due to the presence of decane, subsequently increasing conductivity. Total ion conductivity was 0.45 mS/cm for [LiBNMB-BT] = 1 M in PC at 27 °C and 0.81 mS/cm for the corresponding PC+dec sample, as measured by DOSY NMR. Conductivity was directly measured by EIS, which does not assume full ion dissociation, and σEIS = 0.14 mS/cm at [LiBNMB-BT] = 1 M in PC at 24 °C. Micellar solutions should increase tLi+ and [LiBNMB-BT] solutions showed tLi+ greater than 0.58 as measured by DOSY NMR and by potentiostatic polarization (PP), PC [LiBNMB-BT] < 1 M and PC+dec have tLi+ > 0.46.

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dewing, Beth

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Dc Identifier Citation
Dewing, Beth. (2021). Three Routes to High Transference Number Lithium-ion Battery Electrolytes Using Lithium Bis(Nonenyl-Malonato) Borate. Retrieved from the University Digital Conservancy, https://hdl.handle.net/11299/269554.

Chain of custody

source
Harvested from
University of Minnesota
Base URL
conservancy.umn.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dewing, Beth. Three Routes to High Transference Number Lithium-ion Battery Electrolytes Using Lithium Bis(Nonenyl-Malonato) Borate. 2021. https://hdl.handle.net/11299/269554