Back to search

University of North Florida. School of Engineering

Investigation of Vapor Deposited Conduction Seed Layer for Electrodeposition on Polymers

Abstract

dc:description.abstract

The use of three-dimensional printing (3d printing) technologies are becoming increasingly popular in today’s society due to the time and cost advantages associated with these processes. In industries with a high demand for customizable and one-of-a-kind parts at a low volume, these additive manufacturing processes offer a promising solution. Surgical devices are a great example of this demand. Despite the advantages offered by 3d printing, the mechanical integrity of these 3d printed parts are often not comparable to the solid metal parts that have historically been used. In an effort to create a superior part and reach operational requirements, reinforcement is required. Electroless plating has historically been the method of choice, but this plating process has been deemed an extreme environmental hazard due to the use of chromic acid. Alternatively, electroplating is an environmentally benign process, however this process requires a conductive substrate. In this work, an investigation was conducted to determine how to make the 3d printed parts conductive, maximize adhesion between the conductive layer and the substrate, as well as the conductive layer to a thicker electroplated layer, and the resulting overall properties of the part. Considering a multitude of metallization processes, physical vapor deposition (PVD) offers an alternative method to solution-based metallization and has a reduced environmental footprint. These techniques will be used to apply a thin metal film to the 3d printed parts, serving as a conductive seed layer for electroplating. Using two photopolymers from Carbon® - CE221 and RPU70 – the most promising substrate material was determined to be uncured CE221. It is recommended that PVD strike layer deposition be conducted below 5 x 10-3 Torr. The part will then undergo the prescribed cure cycle for CE221. The part remained conductive enough after the cure cycle to electroplate.

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering (MSME)
Discipline thesis:degree_discipline
Engineering
Grantor
University of North Florida. School of Engineering
Date dc:date.issued
Spring

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Bray, Olivia
  • Bray, Olivia, 1997-
Advisors dc:contributor.advisor
  • Stagon, Stephen
  • Hopson, Peyton
  • Bevill, Grant
Contributors dc:contributor
  • Dr. Stephen Stagon
  • Dr. Peyton Hopson
  • Dr. Grant Bevill

Subjects

dc:subject × 6

Rights

dc:rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.unf.edu/etd/934

Chain of custody

source
Harvested from
University of North Florida
Base URL
digitalcommons.unf.edu/do/oai/
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Bray, Olivia; Bray, Olivia, 1997-. Investigation of Vapor Deposited Conduction Seed Layer for Electrodeposition on Polymers. University of North Florida. School of Engineering, https://digitalcommons.unf.edu/etd/934