University of North Florida. School of Engineering
Numerical study of air vents influence on wave forces acting on box-type bridge girders with cavities under storm surge
Abstract
dc:description.abstractAlong with the continuous rise of sea level, direct interaction between elevated coastal structures, such as coastal bridges, and seawater during storm surge, has been shown to potentially cause bridge failures in the past. For example, Hurricane Irma (2017) generated storm surge levels exceeding 2-3 m in portions of South Florida, causing widespread transportation disruption including roadway washouts, erosion, and bridge approach damage along US-1 in Florida Keys. Similar failures have occurred during Hurricane Ivan (2004), where uplift forces displaced spans of the Escambia Bay Bridge, and Hurricane Ian (2022), which caused partial collapse of the Sanibel Causeway when elevated water levels and wave loading displaced bridge segments. These events demonstrate that when surge levels allow waves to interact directly with bridge soffits, significant uplift forces can develop. Florida’s transportation network is particularly vulnerable because extensive bridge systems are located along low-elevation tidal waterways. Bridge decks submerged during coastal inundation are subjected to substantial hydraulic loads, including hydrostatic uplift due to buoyancy amplified by entrapped air and hydrodynamic uplift generated by vertical wave action, documented extensively in post-event investigations of coastal bridge failures during Hurricane Katrina. Box-type girder bridge decks contain cavity geometry capable of trapping air beneath the soffit during surge inundation, where compression of confined air can amplify impulsive pressure when storm waves impact the deck underside. Previous analytical and experimental investigations show that trapped air significantly increases wave-induced uplift force. This study investigates the influence of adding deck vents as a pressure-relief mechanism for reducing uplift forces related to storm surge. Three-dimensional multiphase computational fluid dynamics simulations are performed in STAR-CCM+ to model wave-structure interaction. The results show that adding a 10% vent-to-soffit area ratio ventilation may lead to a 10% improvement in wave loading response to the elevated bridge structure while adding larger vents may lead to higher uplift forces experienced by the structure
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Civil Engineering (MSCE)
- Discipline thesis:degree_discipline
- Engineering
- Grantor
- University of North Florida. School of Engineering
- Date dc:date.issued
- Summer
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Jihad, Khalida H.
- Jihad, Khalida H., 1973-
- Advisors dc:contributor.advisor
-
- Krisna, Pawitan
- Shamet, Ryan
- Pegah, Ghasemi
- Contributors dc:contributor
-
- Pawitan Krisna
- Ryan Shamet
- Ghasemi Pegah
Subjects
dc:subject × 13- Thesis
- University of North Florida
- UNF
- Dissertations, Academic -- UNF -- Master of Science in Civil Engineering
- Dissertations, Academic -- UNF -- Engineering
- Bridge Deck
- Wave forces
- Coastal engineering
- Air vents
- Uplift force, CFD
- Civil Engineering
- Structural Engineering
- Girders -- Testing; Storm surges; Computational fluid dynamics; Hydrodynamics; Bridges -- Design and construction; Ocean wave power -- Simulation methods -- Testing
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.unf.edu/etd/1468