University of Nevada - Reno
Interface-engineered Additive Manufacturing of Thermoplastic Polymers: Printing Technique and Material Design for End-use Manufacturing
Abstract
dc:description.abstractAdditive manufacturing of thermoplastic polymers has been widely adopted across diverse fields; however, existing techniques face key challenges, including structural limitations, polymer waste, and suboptimal mechanical performance. This dissertation addresses these issues through the development and characterization of advanced thermoplastic printing methods.First, interface-enhanced fused filament fabrication (FFF) was developed to improve bonding between adjacent filaments in conventional layer-by-layer three-dimensional printing. The inherent surface roughness of FFF structures was further leveraged to design a conical thermoplastic centrifuge system intended for fabrication on the lunar surface. A mechanics-based model was established to elucidate the separation mechanism, and polylactic acid cones were fabricated to evaluate the effects of geometry and surface roughness on separation efficiency. To overcome the mechanical and surface limitations of FFF, an embedded fused filament fabrication (e-FFF) approach was introduced. This method employs a thermostable yield-stress support bath composed of fumed silica and sunflower oil to support molten filaments during printing, improving structural integrity and surface quality. Using polycaprolactone feedstock, printing parameters were optimized, and mechanical properties were validated. A patient-specific orbital implant was designed, fabricated, and evaluated, with successful cell incubation demonstrating its biomedical potential. To extend embedded printing to higher-temperature thermoplastics, a molten embedded writing (MEW) technique was developed using a high-temperature support bath of organomodified montmorillonite and sunflower oil. This environment promotes inter-filament fusion and enhances mechanical strength. To demonstrate the broad and applications of MEW, three representative end-use parts, including orbital implants from polycaprolactone, spigots from polylactic acid for a lab-scale hydrocyclone, and sensors from thermal polyurethane, were successfully printed for repairing an orbital bone fracture, enhancing mineral particle separation, and detecting strain and force for a robotic hand, respectively. Finally, a thermo-thickening particle–oil system was developed, enabling a thermo-thickening response-enabled embedded extrusion (TREE) strategy. This approach provides structural support, minimizes polymer waste, and enhances interlayer fusion to achieve properties comparable to virgin materials. TREE’s capability was demonstrated by printing tensile specimens, bifurcated stents, non-pneumatic tires, and metatarsals, as well as a biodegradable bone implant. The TREE strategy paves the way for additive manufacturing of thermoplastic products with superior properties for various engineering applications.
Degree
thesis:*- Level thesis:degree_level
- Doctorate Degree
- Department thesis:degree_department
- Mechanical Engineering
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mitchell, Kellen
- Advisor dc:contributor.advisor
-
- Jin, Yifei
- Committee members dc:contributor.committeemember
-
- Menezes, Pradeep
- Zhang, Jun
- Chu, Pengbo
- Yang, Ying
Subjects
dc:subject × 4Rights
- Language dc:language.iso
- en_US, English
Identifiers
dc:identifier.*- Repository record dc:identifier.uri
- https://scholarwolf.unr.edu/handle/11714/11861