University of Nevada - Reno
Seismic Cycle Effects of Earthquakes and Hydrologic Loading through Modeling of InSAR and GPS Time Series in the Western Great Basin and Southern Sierra Nevada
Abstract
dc:description.abstractDevelopments in satellite geodesy, namely InSAR and GPS systems allow for millimeter scale surface displacements of the Earth's surface to be resolved over time periods sufficient for studying earth processes. Using both systems for joint inversions allows for the strengths of each system to be combined, enabling for better results than each individual system can provide. The GPS system provides high precision, millimeter scale deformation in three orthogonal directions, available at each GPS station. This provides full displacement information, but is dependent on the locations of stations and density of the network. Data from InSAR provides gridded coverage of the land surface, often at a resolution of 30 m2, however the directionality of motion is only resolvable in two to four non-orthogonal directions, mostly in the east and vertical directions, and is mostly insensitive to north-south motion. The precision of the InSAR system is also less than the GPS system by half to an order of magnitude. By incorporating both systems, the resulting models can incorporate both the higher precision and full motion of the GPS system, while also including the high resolution area coverage of the InSAR system. There is also a matter of reference frame for the two systems, where GPS is referenced to the center of mass of the Earth, while InSAR has an arbitrary reference point. Using GPS to anchor InSAR data to the GPS reference frame improves the precision of the InSAR data set, and brings it into alignment with the GPS reference frame.The first study in this projects uses the satellite systems to model the seismic cycle through co-, inter-, and post-seismic motion of the 15 May 2020 Mw 6.5 Monte Cristo Range earthquake, which occurred in the Mina Deflection area of the Central Walker Lane. This is one of the largest earthquakes to occur in Nevada since the December 1954 M 7.1 Fairview Peak and the M 6.9 Dixie Valley earthquakes, making it an important earthquake to study for understanding the tectonics in the area, especially developing transform fault systems. Using both InSAR and GPS systems, varying models can be tested, such as a single plane rupture versus a more complex two plane rupture, as well as varying mechanisms for post-seismic deformation, such as after-slip and viscoelastic relaxation. Results indicate a preference for a complex two plane rupture and dominant after-slip with a possible contribution from viscoelastic relaxation. The second study in the project involves modeling GPS and InSAR time series to observe the seasonal motion of the southern Sierra Nevada Mountains caused by hydrologic loading. Modeling of seasonal motion from InSAR time series can be affected by the arbitrary reference of the data set, and must be brought into alignment with the GPS reference frame. A framework for correcting InSAR data with various interpolation methods between GPS stations is explored. Corrections for earthquakes, tectonic and non-tectonic velocities are preformed to minimize the effect on results for seasonal motion. The results show that the mountains have a different timing of motion than surrounding valleys, an indication of movement of water. Resulting seasonal motions also indicate that the seasonality is more complex than a single annual sinusoid can produce, and semi-annual motion is also solved for, indicating that the seasonality of the mountains and valleys is not symmetric over the course of a year, interpreted as due to different hydrologic process occurring between warm and colder seasons. The third study deals with modeling the water load that cause seasonal motions of the southern Sierra Nevada Mountains, and the stress changes this load causes on nearby faults and comparison of these seasonal stresses to the constant background tectonic stress that drives slip on these faults. Time series of one year are made from seasonal motion of the Sierra Nevada Mountains and surrounding valleys from annual and semi-annual sinusoids, with time variable loading models made from the displacements using the LoadDef software. From loading models, the timing of maximum and minimum water loads are found, showing different timing between the mountains and surrounding valleys, interpreted as a result from moving water and different hydrological process at work between the different regions. Stress from the seasonal loading model is then compared to the background tectonic stress resolved on each fault. The study reveals that while seasonal loading changes are minor in comparison to background tectonic stress, the seasonal fluctuations may still influence timing of earthquake events, as the M7.4 1872 Owens Valley earthquake occurred during the week the model predicts maximum Coulomb stress on the fault.
Degree
thesis:*- Level thesis:degree_level
- Doctorate Degree
- Department thesis:degree_department
- Geophysics
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Crandall-Bear, Aren Teva
- Advisor dc:contributor.advisor
-
- Hammond, William C
- Committee members dc:contributor.committeemember
-
- Blewitt, Geoffrey
- Louie, John
- Trugman, Daniel
- Panorska, Anna
Subjects
dc:subject × 4Rights
- Language dc:language.iso
- en_US, English
Identifiers
dc:identifier.*- Repository record dc:identifier.uri
- https://scholarwolf.unr.edu/handle/11714/11888