Back to search

University of Nevada - Reno

Polymer Concrete Joints for Precast and 3D-Printed Bridge Systems in Accelerated Construction

Abstract

dc:description.abstract

Polymer concrete (PC) is a non-cementitious composite material composed of polymer resin, hardener, and aggregates, in which the binding action takes place through polymerization of the resin rather than hydration of cement as in conventional concrete. Due to rapid polymerization, PC can develop early strength, making it a potential joint material for prefabricated bridge element systems in accelerated construction. Although PC has been successfully used in non-structural applications, such as repairs and bridge deck overlays, its broader structural implementation in bridge systems is limited due to the lack of design-relevant knowledge of its mechanical properties, bond behavior, thermal behavior and structural performance when used as joint material. The goal of this doctoral study is to evaluate the performance of polymer concrete as a structural bridge joint material through an integrated experimental program comprising material level characterization, component level bond evaluation and structural testing. The outcome of this study is a comprehensive knowledge base on design-relevant mechanical, bond, and thermal characteristics of commercially available PC products and their performance in large-scale bridge joint applications including slab girder bridges and post-tensioned 3D-printed segmental bridge systems. This study evaluates the viability of PC as a bridge joint material by (a) characterizing the mechanical and durability properties of PC representing different resin classes and developing empirical relationships for design applications, (b) evaluating the bond behavior of PC with reinforcing steel and conventional concrete under the effects of varying embedment length and splice length of reinforcing steel and different surface preparation strategies for PC-conventional concrete bond, (c) examining the mechanical and bond behavior under adverse thermal conditions, (d) investigating the structural performance of large-scale slab girder bridges with PC as longitudinal closure joints using simplified V-shaped geometry, and (e) assessing the use of PC as a joint material in post-tensioned 3D-printed segmental bridges with non-uniform geometry. The study shows that PC can achieve rapid early-age strength, high tensile and flexural capacity and sufficient bond performance for bridge joint applications. The bond study also shows that PC-conventional concrete bond can be substantially improved through mechanical and chemical interfacial preparation while the rebar-polymer bond is comparable to that of UHPC. The thermal study shows that PC strength remains stable at adverse thermal conditions while bond and stiffness can degrade, necessitating serviceability-based design and detailing. At the structural scale, simplified V-shaped PC joints in slab girder bridges maintained load transfer at design level loads with failure governed by flexural failure of precast slab. However, the serviceability performance was PC material dependent. In 3D-printed segmental bridge system, PVE-PC combined with post-tensioning provided effective continuity when sufficient compressive confinement was present, where the superior bond strength of PC under prestressing confinement helped to shift the failure mechanism from interface controlled debonding to flexural cracking in the printed module. This doctoral study is concluded with practical design recommendations for PC selection, interfacial preparation, joint reinforcement detailing, thermal serviceability consideration and structural use in prefabricated bridge systems. A major outcome of the work is the development of implementation-oriented guidance for the New Mexico Department of Transportation (NMDOT), which provides a pathway for field implementation of PC closure joint for prefabricated bridge systems in accelerated construction.

Degree

thesis:*
Level thesis:degree_level
Doctorate Degree
Department thesis:degree_department
Civil and Environmental Engineering
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Pokharel, Sammelan
Advisor dc:contributor.advisor
  • Moustafa, Mohamed
Committee members dc:contributor.committeemember
  • Ryan, Keri
  • Pekcan, Gokhan
  • Elfass, Sherif
  • Hadj-Nacer, Mustafa

Subjects

dc:subject × 3

Rights

Language dc:language.iso
en_US, English

Identifiers

dc:identifier.*
Repository record dc:identifier.uri
https://scholarwolf.unr.edu/handle/11714/11926

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Pokharel, Sammelan. Polymer Concrete Joints for Precast and 3D-Printed Bridge Systems in Accelerated Construction. Doctorate Degree thesis, 2026. https://scholarwolf.unr.edu/handle/11714/11926