University of Nevada - Reno
ANSYS/Fluent Simulation Model Development for Forced Helium Dehydration Process
Abstract
dc:description.abstractThis thesis describes the development and design of simulation model in "ANSYS FLUENT" for Spent Nuclear Fuel dehydration process by "Forced Helium Dehydration" [13] method [28]. The simulation model was developed using the computational fluid dynamics software "FLUENT" [28]. After defueling a nuclear reactor, the fuel rods are kept underwater. Later they are put into a transfer cask. The fuel rods have to be stored in dry condition for long term storage. "Forced helium dehydration" [13] process uses dry helium gas flow to remove water content from the transfer cask. The mass transfer occurs due to diffusion-advection and evaporation-boiling. There are several evaporation and boiling methods available built in "FLUENT" [28]. So, an optimized method was chosen which was used for simulation of mass transfer in the "Forced Helium Dehydration" [13] process. The method was verified in a two dimensional model, then applied to a three dimensional model. The spent nuclear fuel rods can be arranged in different arrays inside the canister. For our simulation, we used a 7 x 7 array of spent nuclear fuel rods.
Degree
thesis:*- Level thesis:degree_level
- Master's Degree
- Department thesis:degree_department
- Mechanical Engineering
- Year dc:date.issued
- 2016
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Alam, Md Hasibul
- Advisor dc:contributor.advisor
-
- Greiner, Miles
- Committee members dc:contributor.committeemember
-
- Hadj-Nacer, Mustafa
- Tsoulfanidis, Nicholas
Subjects
dc:subject × 3Rights
dc:rights- Statement dc:rights
-
- In Copyright(All Rights Reserved)
- Author(s)
Identifiers
dc:identifier.*- Handle dc:identifier.uri
- http://hdl.handle.net/11714/2117