Back to search

University of Nevada - Reno

Investigation of high temperature carbon reduction for safer, easier, and faster analysis of stable oxygen isotopes in silicates, oxides, and biogenic silica

Abstract

dc:description.abstract

In the past 30 years, use of biogenic silica has been gaining popularity as a tool for paleoclimate investigations in regions that lack significant carbonate deposits. Coupled with this is a continuing demand for δ18O analysis of silicates and oxides for petrologic applications. Fluorination techniques, though producing very accurate and precise δ18O data, are time-consuming and hazardous to generate a large number of analyses in a short amount of time, especially those required for paleoclimate research, and ion microprobe is not suited for analyzing bulk samples. We report here the use of a commercially available oxygen-nitrogen (O/N) analyzer capable of high temperature carbon reduction (HTCR) to produce consistently accurate and precise stable oxygen isotope data for quartz and, in the future, other silicates, oxides, and biogenic silica. International quartz standard NBS-28 and four quartz laboratory standards, ARQ, NCSU, Snowbird, and SGS, are used to test the accuracy and precision of oxygen isotope analyses in the HTCR apparatus. All four lab standards were previously analyzed for δ18O by in-lab laser fluorination (LF) for comparison with values produced in this study. One-mg samples of quartz are wrapped in tin capsules and dropped via autosampler into a graphite crucible within the graphite-electrode furnace of the O/N analyzer. Temperatures >2500°C (power ≥4.0 kW) are used to drive the reduction of SiO2 in the presence of excess carbon (graphite) to produce carbon monoxide (CO) in a continuous flow of He (~250ml/min) that is piped directly to a stable isotope ratio mass spectrometer (IRMS). Total trial time for oxygen extraction and δ18O analysis is 7 minutes. In addition to methodology, the HTCR configuration was developed, including experiments with installing a gas chromatograph in-line between the O/N analyzer and IRMS and attaching an autosampler. Good precision and accuracy is observed in results from analysis of the quartz standards. NBS-28 yields a HTCR precision of ± 0.12 / (n=4). ARQ yields HTCR δ18O of +18.70 ± 0.08 / (n=3) vs. accepted LF δ18O of +19.0 /; NCSU yields HTCR δ18O of +11.25 ± 0.26 / (n=3) vs. accepted LF δ18O of 11.7 /; Snowbird yields HTCR δ18O of +15.57 ± 0.24 / (n=9) vs. accepted LF δ18O of +16.2 /; and SGS (crushed silica glass) yields HTCR δ18O of +11.63 ± 0.38 / (n=4) vs. accepted LF δ18O of +11.8 /. The O/N analyzer produces a mean oxygen yield of 99.86% quantitative conversion of quartz-oxygen to CO. Six diatomite samples from the Quincy Diatomite deposit (Menicucci, 2010) were analyzed and produced consistent δ18O values relative to VSMOW and normalized to NBS-28 ranging from +22.54 ± 0.36 / (n=6) to +27.25 ± 0.31 / (n=6) and produced oxygen yields >95%. Adularia, labradorite, zircon, and magnetite were also analyzed. Consistent δ18O values and >99% oxygen yields were produced for labradorite and adularia, but not for zircon or magnetite. These results demonstrate that a commercially available HTCR-capable instrument, coupled to an IRMS, can consistently produce accurate and precise δ18O data for quartz in very short trial times and without hazardous reagents necessary for laser fluorination. Even so, duplicates must be run for every individual sample due to inexplicable and apparently random drops or spikes in δ18O values that are not related to memory effect or methodology. With full automation and attention to the N2 contamination issues, this HTCR apparatus may attain comparable sample throughput for biogenic silica to that of carbonates.

Degree

thesis:*
Level thesis:degree_level
Master's Degree
Department thesis:degree_department
Geological Sciences and Engineering
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Johnson, Julie A.
Advisor dc:contributor.advisor
  • Arehart, Greg B.
Committee members dc:contributor.committeemember
  • Poulson, Simon R.
  • DeBoer, Katharine L.

Subjects

dc:subject × 6

Rights

dc:rights
Statement dc:rights
  • In Copyright(All Rights Reserved)
  • Author(s)

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11714/3021

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Johnson, Julie A.. Investigation of high temperature carbon reduction for safer, easier, and faster analysis of stable oxygen isotopes in silicates, oxides, and biogenic silica. Master's Degree thesis, 2013. http://hdl.handle.net/11714/3021