Back to search

University of Nevada, Reno

VeloDAQ: Cycling Data Acquisition System

Abstract

dc:description.abstract

The VeloDAQ power measurement pedal is a self-contained data acquisition system used to analyze a cyclist's pedal stroke and wirelessly transmit that information to the rider's smartphone. The VeloDAQ is comparable to other pedal based power measurement devices on the market with the exception of two profound characteristics. First, the VeloDAQ transmits its data via Bluetooth to the user's smart phone; this reduces cost and avoids proprietary communication protocols by using a device a cyclist is likely to already own. Second, the VeloDAQ pedal is the only product that provides a display of force as a function of crank angle, a new but important metric to analyze a cyclist's pedal stroke (as opposed to only power measurements). These two differences allow the VeloDAQ to be less expensive, and therefore more accessible, while still providing greater functionality than similar products already on the market. The design presented is built around already existing pedal technology in order to minimize the cost of production while maintaining a traditional clipless pedal form factor. To measure applied pedaling force, the VeloDAQ uses strain gauges in half Wheatstone bridge configurations mounted along the circumference of the pedal spindle. Within the pedal, angular position and velocity are measured using a Hall effect sensor at a greatly reduced cost when compared to other technologies such as encoders and accelerometers. The output of the Wheatstone bridges and the Hall effect sensor are then sent to an on board microprocessor and transmitted via Bluetooth to the users smartphone or computer which displays the final data for the user. All added components are housed inside a custom designed enclosure that closely follows the style of the original pedal. Testing of the design shows that the pedal is capable of measuring applied forces within ±0.79 pounds and angle within ±2.3 degrees during steady cadence. Due to a failure in one of the strain gauge circuits during final testing, bridge 2 showed an error of ±16 pounds. While significant, this error is not caused by a failure in the methodology, rather implementation and circuitry failures. Final road tests of the pedal were not performed due to irreparable damage to the prototype system. The VeloDAQ sensors performance, when coupled with high data transmission rates and low power consumption standards for Bluetooth (300Kbs and 30mW respectively), creates a system that can provide a cyclist with many hours of high quality data collection. When this information is applied to a training regimen, it can be used to improve the efficiency and power generation of a cyclist over more traditional systems that only provide basic power production and cadence data to the rider.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering
Level thesis:degree_level
Honors Thesis
Department thesis:degree_department
Mechanical Engineering
Grantor
University of Nevada, Reno
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Harvey, Crystal
Advisor dc:contributor.advisor
  • Geiger, Emil J.

Rights

dc:rights
Statement dc:rights
  • In Copyright(All Rights Reserved)
  • Author(s)
Language dc:language.iso
en_US

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11714/416

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Harvey, Crystal. VeloDAQ: Cycling Data Acquisition System. Honors Thesis thesis, University of Nevada, Reno, 2013. http://hdl.handle.net/11714/416