Back to search

University of Nevada - Reno

Microstructural characterization of structural components for Gen-IV Nuclear systems

Abstract

dc:description.abstract

Inconel 617, PM 2000 and MA 956 are alloys recommended for out-of-core structural materials for SFR and VTHR systems. The high temperature deformation for the alloys has been investigated for strain rates varying form 10-3 to 10-5 s-1 at 800°C and 1000°C.The microstructure of the inconel 617 showed increase in grain size and secondary phase precipitates with increase in temperature and decrease in strain rate. The AFM/SKPFM technique measured a surface potential of 389.79mv for the 10-3 strain rate compared to 103.11mv for the 10-5 strain rate hence implying that damage accumulation can be monitored using this non-invasive technique. The creep deformation was investigated for PM 2000 and the secondary creep rate was found to be 1.3 X 10-8 s-1. The morphology of the ODS particles varied as well as the composition. However, pinning of the dislocations and particle fracture was observed. The friction Stir welding of the MA 956 was successful but contamination of the weld by the tool resulted in an increase in hardness from 240 kg/mm2 to 375 kg/mm2.

Degree

thesis:*
Level thesis:degree_level
Master's Degree
Department thesis:degree_department
Chemical and Materials Engineering
Year dc:date.issued
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tache, Ricard
Advisor dc:contributor.advisor
  • Misra, Manoranjan
Committee members dc:contributor.committeemember
  • Raja, Krishnan
  • Siddharthan, Rajaratnam

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • In Copyright(All Rights Reserved)
  • Author(s)

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11714/4227

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tache, Ricard. Microstructural characterization of structural components for Gen-IV Nuclear systems. Master's Degree thesis, 2009. http://hdl.handle.net/11714/4227