Back to search

University of Nevada - Reno

Isopentane Flow Boiling Through Structured-Porous Fins

Abstract

dc:description.abstract

A flow boiling test rig with flow visualization assisted by high speed video camera system was designed and built. Experiments with Isopentane flowing through structured-porous fins were conducted. The fin test articles were made by diffusion-bonding multi-layer staggered-stacked plain-weaved copper wire mesh screens. Seven test articles, sized by 3.7mm×9.8mm×48mm, with mesh number ranging from 50 to 200, and two thin test articles, sized by 2.0mm×9.8mm×48mm, 1.0mm×9.8mm×48mm respectively, with mesh number 200, were made and tested. Experiments were conducted at pressures of 2bar, 3bar and 5bar with channel Reynolds number ranging from 1000 to 10000 for each test article. Pressure drop across the porous fins was measured under cold running state. The influences of pressure, flow rate and mesh number (pore size) on overall boiling performance are investigated. The results show that: 1) Increased system pressure does not display an observable effect on the boiling performance at the tested pressure range. 2) Increase of flow rate generally improves boiling performance. The influence is pronounced only when the heat loading is big enough for the specific boiling surfaces. 3) Influence of mesh number (pore sizes) is complicated. Generally speaking, high mesh-number test article tends to perform better at low heat loading, while rough mesh test articles generally perform better at high heat loading. 4) An Ergun-type correlation for predicting friction factor was developed based on pressure drop data obtained in this study. The correlation can predict the friction factor for test articles (including the thinner ones) made in this study, with 99% of the experimental data fall into ±14% of the predicted values. 5) A model is developed for assessing entropy generation rate for a flow boiling system. A 90% entropy generation decrease was achieved with the M200 (New) test article comparing to an unenhanced plain surface.

Degree

thesis:*
Level thesis:degree_level
Doctorate Degree
Department thesis:degree_department
Mechanical Engineering
Year dc:date.issued
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Zhao, Zenghui
Advisors dc:contributor.advisor
  • Wirtz, Richard A.
  • Park, Chanwoo
Committee members dc:contributor.committeemember
  • Wirtz, Richard A.
  • Park, Chanwoo
  • LaCombe, Jeffrey C
  • Greiner, Miles
  • Tyler, Scott W

Subjects

dc:subject × 6

Rights

dc:rights
Statement dc:rights
  • In Copyright(All Rights Reserved)
  • Author(s)

Identifiers

dc:identifier.*
Handle dc:identifier.uri
http://hdl.handle.net/11714/4406

Chain of custody

source
Harvested from
University of Nevada - Reno
Base URL
scholarwolf.unr.edu/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Zhao, Zenghui. Isopentane Flow Boiling Through Structured-Porous Fins. Doctorate Degree thesis, 2010. http://hdl.handle.net/11714/4406