Back to search

University of North Texas

Surface Degradation Behavior of Bulk Metallic Glasses and High Entropy Alloys

Abstract

dc:description

In this study, the surface degradation behavior was studied for typical examples from bulk metallic glasses (BMGs), metallic glass composites (MGCs) and high entropy alloys (HEAs) alloy systems that are of scientific and commercial interest. The corrosion and wear behavior of two Zr-based bulk metallic glasses, Zr41.2Cu12.5Ni10Ti13.8Be22.5 and Zr57Cu15.4Ni12.6Al10Nb5, were evaluated in as-cast and thermally relaxed states. Significant improvement in corrosion rate, wear behavior, and friction coefficient was seen for both the alloys after thermal relaxation. Fully amorphous structure was retained with thermal relaxation below the glass transition temperature. This improvement in surface properties was explained by annihilation of free volume, the atomic scale defects in amorphous metals resulting from kinetic freezing. Recently developed MGCs, with in situ crystalline ductile phase, demonstrate a combination of mechanical properties and fracture behavior unseen in known structural metals. The composites showed higher wear rates but lower coefficient of friction compared to monolithic amorphous glasses. No tribolayer formation was seen for the composites in sharp contrast to that of the monolithic metallic glasses. Corrosion was evaluated by open circuit potential (OCP) analysis and potentiodynamic polarization. Site-specific corrosion behavior was studied by scanning vibration electrode technique (SVET) to identify formation of galvanic couples. Scanning kelvin probe microscope was used to map elecropositivity difference between the phases and linked to wear/corrosion behavior. Phases with higher elecropositivity were more susceptible to surface degradation. Wear and corrosion synergy in marine environment was evaluated for two high entropy alloys (HEAs), CoCrFeMnNi and Al0.1CoCrFeNi. Between the two alloys, Al0.1CoCrFeNi showed better wear resistance compared to CoCrFeMnNi in dry and marine conditions due to quicker passivation, a higher magnitude of polarization resistance and significantly larger pitting resistance.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ayyagari, Venkata Aditya
Contributors dc:contributor
  • Mukherjee, S. (Sundeep)
  • Dahotre, Narendra B.
  • Mishra, Rajiv S.
  • Aouadi, Samir
  • Scharf, Thomas W.

Subjects

dc:subject × 11

Rights

dc:rights
Statement dc:rights
  • Public
  • Ayyagari, Venkata Aditya
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_891
https://digital.library.unt.edu/ark:/67531/metadc1062863/
ark: ark:/67531/metadc1062863

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ayyagari, Venkata Aditya. Surface Degradation Behavior of Bulk Metallic Glasses and High Entropy Alloys. University of North Texas, 2017. https://doi.org/10.12794/metadc1062863