Back to search

University of North Texas

High Temperature Sliding Wear Behavior and Mechanisms of Cold-Sprayed Ti and Ti-TiC Composites

Abstract

dc:description

Ti and Ti-based alloys are used in many aerospace and automotive components due to their high strength-to-weight ratio and corrosion resistance. However, room and elevated temperature wear resistance remain an issue, thus requiring some form of secondary hard phase, e.g., refractory carbides and oxides, as well as solid lubrication to mitigate wear. In this study, Ti-TiC (14, 24 and 35 vol% TiC) composite coatings were deposited on mild steel substrates using cold spray with comparisons made to baseline cold-sprayed Ti. The dry sliding friction and wear behavior were studied from 25°C to 575°C and during thermal cycling in this temperature range. While the room temperature friction coefficient of all the coatings remained relatively constant at ~0.5, the wear rate continually decreased from ~1x10-3 to ~2x10-5 mm3/N-m with increasing the TiC loading. Raman spectroscopy measurements determined that the same TiO2 tribochemical phases (rutile and anatase) were present on the room temperature sliding wear surfaces, thus responsible for similar friction coefficients. With increasing sliding temperatures to 575°C, the Ti-35%TiC composite coating exhibited the best overall tribological behavior, i.e., the friction coefficient decreased to ~0.3 along with a negative wear rate of -6.6x10-5 mm3/N-m (material gain on the wear track was recorded due to oxidation and transfer from the counterface). These friction and wear reductions were determined to be due to the formation of stable, low interfacial shear strength oxide glaze layers on the wear surfaces, composed of TiO2, WO3, and CoWO4 (transfer from WC-Co counterface). In addition, self-adaptive friction behavior was observed during thermal cycling as a result of the microstructural and tribochemical differences in the tribolayers.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Koricherla, Manindra Varma
Contributors dc:contributor
  • Scharf, Thomas W.
  • Aouadi, Samir M.
  • Voevodin, Andrey A.

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Public
  • Koricherla, Manindra Varma
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_2204
https://digital.library.unt.edu/ark:/67531/metadc1707340/
ark: ark:/67531/metadc1707340

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Koricherla, Manindra Varma. High Temperature Sliding Wear Behavior and Mechanisms of Cold-Sprayed Ti and Ti-TiC Composites. University of North Texas, 2020. https://doi.org/10.12794/metadc1707340