Back to search

University of North Texas

Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear

Abstract

dc:description

To minimize global carbon emissions, having efficient jet engines and internal combustion engines necessitates utilizing lightweight alloys such as Al, Ti, and Mg-based alloys. Because of their remarkable strength/weight ratio, these alloys have received a lot of attention. Nonetheless, they have very poor tribological behavior, particularly at elevated temperatures beyond 200 °C, when most liquid lubricants begin to fail in lubrication. Over the last two decades, there has been a lot of interest in protecting Al, and Ti-based alloys by developing multiphase solid lubricants with a hard sublayer that provide mechanical strength and maintain the part's integrity while providing lubricity. The development of novel coatings with superior lubricity, high toughness, and high-temperature tolerance remains a challenging and hot topic to research and provide new engineered solutions for. To address and provide solutions to protect light-weight, i.e., Al, and Ti alloys at high-temperature and bestow superior tribological properties to such alloys, three types of adaptive lubricious coatings have been studied in this thesis: Nb-Ag-O self-healing lubricious ternary oxide, PEO-chameleon a self-adaptive multi-phase coating, and Sb2O3-MSH-C lubricious adaptive coatings to address this challenge. The development of the Nb-Ag-O ternary resulted in a coefficient of friction as low as 0.2 at 600 °C and crack healing at 900 °C. PEO-chameleon coatings demonstrated a remarkably low COF, as low as 0.07 at 300 °C and 1.4 GPa applied pressure. Finally, the Sb2O3-MSH-C multi-phase lubricious solid lubricant revealed superlubricity, with a CoF of 0.008 at 300 °C, providing a potentially promising contender for high-temperature, high-load applications.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shirani, Asghar
Contributors dc:contributor
  • Berman, Diana
  • Aouadi, Samir
  • Voevodin, Andrey
  • Scharf, Thomas
  • Nasrazadani, Seifollah

Subjects

dc:subject × 13

Rights

dc:rights
Statement dc:rights
  • Public
  • Shirani, Asghar
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_2836
https://digital.library.unt.edu/ark:/67531/metadc1944273/
ark: ark:/67531/metadc1944273

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Shirani, Asghar. Mechanically Driven Reconstruction of Materials at Sliding Interfaces to Control Wear. University of North Texas, 2022. https://doi.org/10.12794/metadc1944273