Back to search

University of North Texas

An Optimized Control System for the Independent Control of the Inputs of Doherty Power Amplifier

Abstract

dc:description

This thesis presents an optimized drive signal control system for a 2.5 GHz Doherty power amplifier (PA). The designed system enables independent control of the amplitudes and phases of the drive signals fed to the inputs of two parallel PAs. This control system is demonstrated here for Doherty PA architecture with a combiner network which is used as an impedance inversion between the path of two parallel connected PAs. Independent control of the inputs is achieved by incorporating a variable attenuator (VA) and a variable phase shifter (VPS) in each of the two parallel paths. Integrating VA and VPS allows driving varying power levels with an arbitrary phase difference between the individual parallel PAs. A Combiner network consists of a quarter-wave transmission line at the output of the main power amplifier, which is used to invert the impedance between the main and peaking transistor. The specific VA (Qorvo QPC6614) and VPS (Qorvo QPC2108) components that are used for the test system provide an amplitude attenuation range from 0.5 dB to 31.5 dB with a step size of 0.5 dB and a phase range from 0◦ to 360◦ for a step size of 5.6◦at the intended operating frequency of 2.5 GHz, offering the benefit of characterizing the behavior of PAs under test for an extensive range of drive signals to optimize the output performance such as power added efficiency (PAE) or adjacent channel leakage ratio (ACLR). For demonstration, the designed drive signal control system is integrated with two parallel GaN transistor-based PAs (Qorvo QPD0005) with a P1dB of 37.7 dBm. Each PA is preceded by a drive amplifier with a gain of 17.8 dB to boost the power fed into the PA. The control system incorporates various custom-designed components such as a 20 dB directional coupler, a 3 dB Wilkinson power splitter, a quarter-wave transmission line, and a Doherty power combiner. While Qorvo QPD0005 (DUT) is used as a specific test case in this demonstration, the proposed system can characterize the behavior of a wide range of Doherty PAs.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sah, Pallav Kumar
Contributors dc:contributor
  • Mahbub, Ifana
  • Luyen, Hung
  • Guturu, Parthasarathy

Subjects

dc:subject × 3

Rights

dc:rights
Statement dc:rights
  • Public
  • Sah, Pallav Kumar
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_3129
https://digital.library.unt.edu/ark:/67531/metadc2048619/
ark: ark:/67531/metadc2048619

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Sah, Pallav Kumar. An Optimized Control System for the Independent Control of the Inputs of Doherty Power Amplifier. University of North Texas, 2022. https://doi.org/10.12794/metadc2048619