Back to search

University of North Texas

Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas

Abstract

dc:description

In this study, four different NiTi-based shape memory alloys (SMAs) compositions were processed, shape-set, and characterized to evaluate their effectiveness as SMA actuation component for satellite antennas. Three of the compositions were commercially available NiTi wires (90°C Flexinol® actuator NiTi wire and Confluent ADB SE508 NiTi wire), NiTi SM495 plates (ATI Specialty Alloys and Components) and the other composition was in house lab-produced NiTiCu plate. Different shape-setting techniques were performed such as pin and plate, fixtures and dies, and finally a sandwich fixture. The two most promising outcomes were the SE NiTi 508 wire and the NiTiCu plate. A SE NiTi 508 wire was first heat-treated at 550 °C for 3 hours and then it was shape-set at 450 °C for 30 min using a Cu tube which was previously deformed to the desired deployment curvature and fixed on a steel rig. The wire was kept inside the Cu tube during the shape-setting process to obtain the desired curvature. After shape-setting, the wire was thermally cycled multiple times. The results showed that the SE NiTi 508 wire was able to retain its deployment shape successfully after each thermal cycle. Furthermore, a NiTiCu plate was sandwiched between two steel sheets which were shaped into the desired full-deployment shape beforehand. The NiTiCu plate was shape-set at 450 °C for 30 min and then thermally cycled multiple times to test its effectiveness. The NiTiCu plate retained its full-deployment shape successfully after every thermal cycle.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2022

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Al Jabri, Nehal Ahmed Mubarak
Contributors dc:contributor
  • Young, Marcus L.
  • Aouadi, Samir M.
  • Mishra, Rajiv S.

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Public
  • Al Jabri, Nehal Ahmed Mubarak
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_3136
https://digital.library.unt.edu/ark:/67531/metadc2048626/
ark: ark:/67531/metadc2048626

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Al Jabri, Nehal Ahmed Mubarak. Processing and Shape-Setting of Shape Memory Alloys for Small Satellite Antennas. University of North Texas, 2022. https://doi.org/10.12794/metadc2048626