Back to search

University of North Texas

Investigation of Cu-Al Bonding Interface: Eliminating Bimetallic Corrosion Failures, and Enabling Next-Gen Cu-Cu Wire-Bonding by Nanometer Interfacial Chemistry Control

Abstract

dc:description

The first part of this dissertation explores the chemistry of an inhibitor complexation with Cu. First, the Cu oxidation state of the complex was +1. Second, identified by differential RAIRS, one source of Cu(I) for the Cu(I)-inhibitor complex could be Cu(I) oxide. The characteristic Cu(I) oxide peak at 650 cm⁻¹ was observed to decrease after CVD coating process was applied. This led to a major hypothesis that in order for the reaction between Cu(I) oxide and the inhibitor to proceed, protons from the inhibitor and oxygen from Cu₂O are stabilized by reacting to form water. The applicability of the passivation nature of Cu(I)-inhibitor films was explored for Cu-Al wire-bonded devices in its ability to protect from Cu-Al peripheral galvanic corrosion and the galvanic corrosion of the Cu-Al intermetallic compounds in their roles for corrosion-induced liftoff. The second part of this work studied the effect of replacing Al bond pad with Cu on the corrosion induced liftoff of wire-bonds when exposed to low ppm levels of chloride contamination. Applying protective coating to the Cu pad surface before wire-bonding was found to suppress the thermally induced oxidation of Cu in air, helping to enable successful Cu-Cu direct wire-bonding. Compared to Cu-Al devices with passivation coating, which has a few wires liftoff with 6 hours, the Cu-Cu bonded devices survived much longer, over 40 days, with almost no liftoff observed. This demonstrates that removing the galvanic contact, the root cause of the corrosion induced failure, is a more robust and permanent solution to the corrosion experienced by these devices.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alptekin, John Faruk
Contributors dc:contributor
  • Chyan, Oliver Ming-Ren
  • Verbeck, Guido F.
  • Yan, Hao
  • Marshall, Paul

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Public
  • Alptekin, John Faruk
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_3389
https://digital.library.unt.edu/ark:/67531/metadc2332525/
ark: ark:/67531/metadc2332525

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Alptekin, John Faruk. Investigation of Cu-Al Bonding Interface: Eliminating Bimetallic Corrosion Failures, and Enabling Next-Gen Cu-Cu Wire-Bonding by Nanometer Interfacial Chemistry Control. University of North Texas, 2023. https://doi.org/10.12794/metadc2332525