Back to search

University of North Texas

Binder Jet Additive Manufacturing of Tungsten Carbide-Cobalt Tooling Material

Abstract

dc:description

This research investigated the binder jet additive manufacturing (BJAM) of WC-10 wt.%Co, emphasizing the evolution of phase and microstructure throughout BJAM densification techniques. The BJAM process was first optimized by setting a layer thickness of 124 μm and a binder saturation level of 60%. Initial samples were fabricated using coarse WC particles (D50 - 28 μm) and fine Co particles. Printed parts underwent a curing step at 200°C to enhance green density, enabling part stability. Subsequently, debinding removed the binder to eliminate any residuals before densification techniques. BJAM densification techniques included sintering, hot isostatic pressing (HIP), and pack carburizing. The phases and microstructure in the fabricated parts were examined via X-ray diffraction, scanning electron microscopy, electron backscatter diffraction, energy-dispersive x-ray spectroscopy, and hardness measured by Vickers hardness testing. BJAM printed WC-10 wt.%Co samples achieved 77% and 82% density following sintering and HIP, respectively. XRD revealed the presence of undesirable η phases after sintering and sinter+HIP. Moreover, EBSD observations confirmed the grain coursing during the densification techniques. The pack carburizing step effectively decomposed the η phase, reverting it to the desirable WC phase. This transformation also resulted in improved hardness for carburized samples compared to sintered and sintered+HIPed samples. However, there was no significant change in the density after pack carburizing. This study demonstrated the feasibility of using BJAM for WC-Co alloys, highlighting the effectiveness of pack carburizing in refining phase composition by η phase decomposition into the WC phase.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Patel, Kunal Balkrishnabhai
Contributors dc:contributor
  • Dahotre, Narendra B
  • Joshi, Sameehan S
  • Sharma, Shashank

Subjects

dc:subject × 3

Rights

dc:rights
Statement dc:rights
  • Public
  • Patel, Kunal Balkrishnabhai
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_4051
https://digital.library.unt.edu/ark:/67531/metadc2415950/
ark: ark:/67531/metadc2415950

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Patel, Kunal Balkrishnabhai. Binder Jet Additive Manufacturing of Tungsten Carbide-Cobalt Tooling Material. University of North Texas, 2024. https://doi.org/10.12794/metadc2415950