Back to search

University of North Texas

Thermomechanical Processing of Tungsten and Its Alloys for Fusion Energy Applications

Abstract

dc:description

Tungsten is a leading candidate for first-wall components in fusion reactors due to its exceptional high-temperature properties and irradiation resistance. However, its high brittle-to-ductile transition temperature (BDTT) attributed to a non-planar screw dislocation core structure and weak grain boundary cohesion limit operational reliability in fusion environments. This study addresses these challenges by tailoring tungsten’s microstructure through thermomechanical processing and alloying strategies. Finite element simulations and systematic experiments demonstrated that edge chamfering significantly improved rollability by reducing stress concentrations. The effects of hot rolling (~1250 °C), warm rolling (~900 °C), and low temperature rolling on the microstructure and mechanical properties were evaluated to obtain fundamental understanding of the brittle to ductile transition mechanisms. Compared to BDTT ~ 350 °C in the as-received state, hot rolling lowered it to ~ 200 °C while warm rolling reduced it further to ~ 100 °C. Overall, warm rolling showed the best performance in terms of higher strength, improved ductility, enhanced fracture toughness, lower strain rate sensitivity (SRS), and refined microstructure. To further improve performance, K-doped tungsten was developed via powder metallurgy and hot rolling. The potassium doping suppressed recrystallization and resulted in a fine microstructure, high fracture toughness, and reduced SRS — all indicative of improved microstructural stability. Beyond dilute tungsten alloy systems, a novel low-activation W–Ta–Ti–V–Zr high-entropy alloy was studied in as-cast and thermomechanically processed conditions. The as-cast alloy exhibited a dual-phase dendritic microstructure with excellent high-temperature strength, ~ 650 MPa at 500 °C. Hot Isostatic Pressing (HIP) at 1600 °C promoted homogenization and V₂Zr-type Laves phase formation in the inter-dendritic regions, improving hardness uniformity and fracture toughness. This work establishes key processing–microstructure–property relationships in tungsten, demonstrating that thermomechanical processing, strategic doping, and concentrated alloying are effective strategies for tailoring its performance in the demanding fusion environments.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Alla, Siva Shankar
Contributors dc:contributor
  • Rout, Bibhudutta
  • Scharf, Thomas W.
  • Young, Marcus L.
  • Mukherjee, Sundeep
  • Vasudevan, Vijay K.

Subjects

dc:subject × 5

Rights

dc:rights
Statement dc:rights
  • Public
  • Alla, Siva Shankar
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_4502
https://digital.library.unt.edu/ark:/67531/metadc2482606/
ark: ark:/67531/metadc2482606

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Alla, Siva Shankar. Thermomechanical Processing of Tungsten and Its Alloys for Fusion Energy Applications. University of North Texas, 2025. https://doi.org/10.12794/metadc2482606