Back to search

University of North Texas

Perovskite Solar Cells and Avenues to Address Their Stability with the Incorporation of Two-Dimensional Materials

Abstract

dc:description

In today's world, conventional energy resources (oil, gas, and coal) are most widely utilized for energy production, which has a negative influence on the environment, resulting in issues such as excessive air pollution, climate change, and global warming. Since we rely so much on fossil fuels for our energy needs, the harmful carbon emissions they produce, unfortunately, are one major reason for the climate change issues we face currently. This motivates us to seek alternative energy sources that are renewable and pose little to no negative impacts on the environment. One such renewable energy source is solar energy where energy can be extracted from incoming sunlight and converted into electricity using solar cells. While commercialized silicon solar cells are the most common, perovskite solar cells (PSCs) are recognized as a rising photovoltaic technology with the potential for integration into a variety of applications. In this work we address the main challenge within PSCs, which is their stability. By conducting maximum power point tracking (MPPT) on a PSC in an air-ambient environment at room temperature, we show the use of a nitrogen-ambient environment during long-term testing to enhance device stability. This highlights the importance of limiting external factors that can degrade the perovskite layer during in-use device testing. To combat this degradation, we examine the effects that two-dimensional (2D) materials have on the stability of a PSC when integrated into its architecture. Transition metal dichalcogenides (TMDCs), such as tungsten disulfide (WS2) and tungsten diselenide (WSe2), are 2D materials with unique optoelectronic properties that express even more interesting results when paired with an annealing method known as photonic curing. After photonic curing a silicon substrate with WS2 ink above the substrate, a 200% increase in current is observed with interesting changes also observed in their Raman and photoluminescence (PL) spectra as well. A similar such experiment was replicated with WSe2 ink, which resulted in current approximately doubling after curing. Again, Raman spectroscopy demonstrated slight Raman shifts after photonic curing with a decrease in intensity, and PL spectroscopy exhibited several sharp peaks with high intensities given that the WSe2 device showed insignificant results before being placed in the photonic curing system. This 2D material, when used as a hole transport layer (HTL) of a solar cell and combined with photonic curing, exhibited a power conversion efficiency (PCE) almost triple of that of its initial measurement before curing. Observing the impact WSe2 has when integrated into a PSC, we utilize it as an interface between the HTL and perovskite layer to understand its ability to shield the perovskite absorber from environmental stressors, which is then compared to two other interfacial organic, polymeric materials, as well as a control device without interface engineering. One of the polymeric materials used, poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) (PTB7), and the WSe2 interfaces demonstrated the most exceptional performances as interfacial layers, while PSCs without an interface displayed severe degradation. This stresses the necessity of an interfacial layer to promote stability which can further address the long-term viability of PSCs for practical applications.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Jones, Brendan
Contributors dc:contributor
  • Kenarangui, Rasool
  • Kaul, Anupama B.
  • Wang, Shuping

Subjects

dc:subject × 3

Rights

dc:rights
Statement dc:rights
  • Public
  • Jones, Brendan
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_4613
ark: ark:/67531/metadc2566482

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Jones, Brendan. Perovskite Solar Cells and Avenues to Address Their Stability with the Incorporation of Two-Dimensional Materials. University of North Texas, 2025. https://digital.library.unt.edu/ark:/67531/metadc2566482/