Back to search

University of North Texas

Investigation Of Metal-Selective Passivation Coatings and Deep Eutectic Solvents to Mitigate Cu-Al Galvanic Corrosion and Post-Etch Residues in Advanced Integrated Circuit Manufacturing

Abstract

dc:description

This dissertation investigates and addresses critical reliability challenges in semiconductor manufacturing by identifying and tuning chemical interactions at critical material interfaces. The first part of the thesis focuses on mitigating corrosion and oxidation failures in copper (Cu) interconnects, while the second part develops sustainable wet-chemical solutions for next-generation interconnect materials. In this context, Chapter 2 examines corrosion failure mechanisms driven by ionic species (S²⁻, SO₄²⁻, Cl⁻, Br⁻, and F⁻) present in epoxy molding compounds used in Cu–Al wire-bonded devices. Corrosion screening results demonstrate that, at room temperature, even ppm-level concentrations of halide ions (Cl⁻, Br⁻, and F⁻) are sufficient to induce severe corrosion failures. Mechanistic investigations further reveal that Cl⁻- and Br⁻-induced corrosion is primarily driven by galvanic coupling between the Cu wire and the Al bond pad, whereas F⁻-induced degradation exhibits characteristics consistent with a direct chemical etching mechanism. Although the current industrial mitigation strategy employs a micron-thin palladium (Pd) metal overlay as a protective layer to prevent Cu exposure to corrosive ions, copper-exposed regions were still observed, resulting in approximately 23% wire-bond failures in accelerated immersion screening tests. These findings underscore the need for alternative, cost-effective solutions to enhance wire-bond reliability. In Chapter 3, this work applies interfacial chemistry control to develop and validate low-cost, industrially viable Cu- and Al-selective passivation coatings to eliminate Cu and Al from the galvanic corrosion cell. Notably, pilot-scale studies based on Cu-selective passivation achieved approximately 99% corrosion protection and successfully passed the most stringent automotive-grade reliability tests without failure. Chapter 4 further details the optimization of a Cu-selective passivation layer into an ultra-thin (<10 nm), highly dense anti-oxidative film. This engineered interfacial layer effectively suppresses Cu reactivity and inhibits oxidation at elevated temperatures (200–300 °C), thereby enabling low-cost Cu–Cu direct bonding in ambient air. The bonded Cu–Cu interconnects demonstrated excellent bonding strength and corrosion resistance, even under extreme mixed-ion conditions. This advancement represents a critical step toward enabling heterogeneous integration and high-performance computing applications. In the final chapter, the dissertation addresses the transition to alternative interconnect metals, specifically Ruthenium (Ru) and Molybdenum (Mo), which are anticipated to replace Cu in sub-10 nm interconnects due to their lower effective resistivity at reduced dimensions. This study leverages the chemical coordination capability of choline chloride (CC)-based deep eutectic solvents (DESs) with metal oxides to effectively etch Ru and Mo oxides. Etching analyses demonstrate that optimized DES formulations composed of CC:urea and CC:malonic acid enable effective and selective removal of Ru and Mo oxides without damaging surrounding dielectric materials. These results highlight the potential of DES-based chemistries as environmentally sustainable alternatives to conventional toxic etching processes for post-etch residue removal.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kumaravel, Dinesh Kumar
Contributors dc:contributor
  • Berhe, Seare A
  • Acree Jr, William E.
  • Golden, Teresa D.
  • Chyan, Oliver M R
  • Pillai, Karthikeyan

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Public
  • Kumaravel, Dinesh Kumar
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_4843
ark: ark:/67531/metadc2588694

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kumaravel, Dinesh Kumar. Investigation Of Metal-Selective Passivation Coatings and Deep Eutectic Solvents to Mitigate Cu-Al Galvanic Corrosion and Post-Etch Residues in Advanced Integrated Circuit Manufacturing. University of North Texas, 2026. https://digital.library.unt.edu/ark:/67531/metadc2588694/