University of North Texas
Additive Manufacturing of Ti–Nb Alloys: Thermokinetics-Driven Microstructural Evolution and Structure–Property Relationships
Abstract
dc:descriptionLaser Powder Bed Fusion (L-PBF) has emerged as a promising additive manufacturing technique for the fabrication of biomedical alloys, offering precise control over complex geometries and enabling near-net-shape components with minimal material waste. However, the layer-by-layer nature of L-PBF produces complex thermal histories characterized by rapid and repeated heating and cooling cycles, which govern microstructural evolution and consequently influence the mechanical and functional properties of the fabricated components. In this context, the present thesis investigates the fabrication of Ti-25Nb, Ti-25Nb-5Sn, and Ti-45Nb (wt.%) alloys from blended elemental powders, addressing the associated processing challenges and examining how process-induced spatial and temporal variations drive microstructural and phase evolution, ultimately determining the resulting structure-property relationships. To overcome the challenges associated with Nb melting in Ti-25Nb, thermal management strategies, including optimization of laser power, reduction of scan length to 1 mm, and substrate preheating above the β-transus temperature (1123 K), were employed to enhance Nb melting and control phase transformations. Under all processing conditions, columnar grain structures consisting primarily of a β matrix with varying fractions of α″ martensite and α phase were observed. The microstructure produced at 200 W exhibited fine α″ martensite needles within the β matrix, whereas the 300 W condition resulted in coarser martensitic laths with nearly twice the martensitic area fraction. In contrast, substrate preheating promoted diffusional phase transformations, leading to the formation of equilibrium α + β microstructures and suppression of martensitic transformation. To elucidate the governing mechanisms underlying these microstructural variations, a multiscale finite element-based thermokinetic model, spanning melt pool to component scale, was developed. Both mechanical and corrosion performance were favorably influenced by substrate preheating due to the promotion of diffusional β-to-α transformation at the expense of martensitic transformation; however, the ductility of the samples remained limited to approximately 5%. The addition of Sn in Ti-25Nb-5Sn significantly improved ductility, yielding nearly a twofold increase compared with Ti-25Nb. However, the relatively low boiling point of Sn increased evaporation losses and recoil pressure within the melt pool, promoting incomplete Nb melting and compositional heterogeneity. These microstructural features contributed to localized galvanic corrosion, while the martensite fraction also strongly influenced the corrosion response. To achieve a single-phase β structure and further improve ductility, the Nb content was increased to 45 wt.%, and laser processing parameters were optimized through scan strategy design to ensure full densification with minimal unmelted Nb. The thermokinetic differences induced by scan strategy in Ti-45Nb were investigated using thermal modeling and correlated with the extent of unmelted Nb and variations in grain size. Subsequently, the mechanical properties, including Young's modulus, yield strength, ultimate tensile strength, and ductility, as well as corrosion behavior, were evaluated and compared with a reference sample to contextualize the performance of the additively manufactured material. Overall, this work establishes a fundamental understanding of process optimization for reducing unmelted Nb and clarifies the thermokinetic factors governing microstructural evolution and their influence on the performance of L-PBF-fabricated Ti-Nb-based alloys.
Degree
thesis:*- Grantor dc:publisher
- University of North Texas
- Year dc:date
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Palaniappan, Selvamurugan 1995-
- Contributors dc:contributor
-
- Dahotre, Narendra B.
- Srivilliputhur, Srinivasan G
- Siller Carrillo, Hector Rafael
- Joshi, Sameehan S.
- Banerjee, Rajarshi
Subjects
dc:subject × 3Rights
dc:rights- Statement dc:rights
-
- Public
- Palaniappan, Selvamurugan 1995-
- Copyright
- Copyright is held by the author, unless otherwise noted. All rights Reserved.
- Language dc:language
- English
Identifiers
dc:identifier.*- Identifier
-
local-cont-no: submission_5061
ark: ark:/67531/metadc2652550