Back to search

University of North Texas

Selectivity Failure in the Chemical Vapor Deposition of Tungsten

Abstract

dc:description

Tungsten metal is used as an electrical conductor in many modern microelectronic devices. One of the primary motivations for its use is that it can be deposited in thin films by chemical vapor deposition (CVD). CVD is a process whereby a thin film is deposited on a solid substrate by the reaction of a gas-phase molecular precursor. In the case of tungsten chemical vapor deposition (W-CVD) this precursor is commonly tungsten hexafluoride (WF6) which reacts with an appropriate reductant to yield metallic tungsten. A useful characteristic of the W-CVD chemical reactions is that while they proceed rapidly on silicon or metal substrates, they are inhibited on insulating substrates, such as silicon dioxide (Si02). This selectivity may be exploited in the manufacture of microelectronic devices, resulting in the formation of horizontal contacts and vertical vias by a self-aligning process. However, reaction parameters must be rigorously controlled, and even then tungsten nuclei may form on neighboring oxide surfaces after a short incubation time. Such nuclei can easily cause a short circuit or other defect and thereby render the device inoperable. If this loss of selectivity could be controlled in the practical applications of W-CVD, thereby allowing the incorporation of this technique into production, the cost of manufacturing microchips could be lowered. This research was designed to investigate the loss of selectivity for W-CVD in an attempt to understand the processes which lead to its occurrence. The effects of passivating the oxide surface with methanol against the formation of tungsten nuclei were studied. It was found that the methanol dissociates at oxide surface defect sites and blocks such sites from becoming tungsten nucleation sites. The effect of reactant partial pressure ratio on selectivity was also studied. It was found that as the reactant partial pressures are varied there are significant changes in the product partial pressure ratios, which are associated with gas phase reactions which contribute to the loss of selectivity.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
1994

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cheek, Roger W. (Roger Warren)
Contributors dc:contributor
  • Kelber, Jeffry Alan, 1952-
  • Pinizzotto, Russell F.
  • Acree, William E. (William Eugene)
  • Marshall, Paul, 1960-
  • Schwartz, Martin

Subjects

dc:subject × 4

Rights

dc:rights
Statement dc:rights
  • Public
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights reserved.
  • Cheek, Roger W. (Roger Warren)
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
call-no: 379 N81d no.3950
untcat: b1808904
local-cont-no: 1002720919-cheek
ark: ark:/67531/metadc277954

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cheek, Roger W. (Roger Warren). Selectivity Failure in the Chemical Vapor Deposition of Tungsten. University of North Texas, 1994. https://digital.library.unt.edu/ark:/67531/metadc277954/