Back to search

University of North Texas

Cold-Formed Steel Bolted Connections Using Oversized and Slotted Holes without Washers

Abstract

dc:description

In cold-formed steel (CFS) construction, bolted connections without washers for either oversized or slotted holes may significantly expedite the installation process and lower the cost. However, the North American Specification (AISI S100, 2007) for the Design of Cold-Formed Steel Structural Members requires washers to be installed in bolted connections with oversized or slotted holes. A research project (Phase 1) sponsored by American Iron and Steel Institute (AISI) was recently completed at the University of North Texas (UNT) that investigated the performance and strength of bolted CFS connections with oversized and slotted holes without using washers. The research presented in this thesis is the Phase 2 project in which the bolted CFS connections were studied in a broader respect in terms of the failure mechanism, the material thickness, and the hole configurations. Single shear and double shear connections without washers using oversized holes, oversized combined with standard or slotted holes were experimentally examined. Combined with Phase 1 results, the Phase 2 gives a comprehensive evaluation of the behavior and strength of bolted CFS connections with oversized and slotted holes without using washers. Revisions to the existing AISI North American Specification requirements for bolted connections are proposed to account for the reduction in the connection strength caused by the oversized and slotted hole configurations without washers. Specific LRFD and LSD resistance factors and ASD safety factors for different hole configurations in terms of the new proposed methods were presented.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2010

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Xu, Ke
Contributors dc:contributor
  • Yu, Cheng
  • Nasrazadani, Seifollah
  • Arnold, Althea

Subjects

dc:subject × 10

Rights

dc:rights
Statement dc:rights
  • Public
  • Copyright
  • Xu, Ke
  • Copyright is held by the author, unless otherwise noted. All rights reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
oclc: 699486956
untcat: b3912728
https://digital.library.unt.edu/ark:/67531/metadc30530/
ark: ark:/67531/metadc30530

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Xu, Ke. Cold-Formed Steel Bolted Connections Using Oversized and Slotted Holes without Washers. University of North Texas, 2010. https://doi.org/10.12794/metadc30530