Back to search

University of North Texas

Silver Tantalate: a High Temperature Tribological Investigation

Abstract

dc:description

As technology advances, mechanical and electrical systems are subjugated to intense temperature fluctuations through their service life. Designing coatings that operate in extreme temperatures is, therefore, a continuing challenge within the tribology community. Silver tantalate was chosen for investigation at the atomic level, the physical and chemical properties that influence the thermal, mechanical, and tribological behavior for moving assemblies in high temperature tribological applications. By correlating behavior of internal physical processes to the macro tribological behavior, the tribological community will potentially gain improved predicative performance of solid lubricants in future investigations. Three different approaches were explored for the creation of such materials on Inconel substrates: (1) powders produced using a solid state which were burnished on the surface; (2) monolithic silver tantalate thin films deposited by magnetron sputtering; and, (3) an adaptive tantalum nitride/silver nanocomposite sputter-deposited coating that forms a lubricious silver tantalate oxide on its surface when operated at elevated temperatures. Dry sliding wear tests of the coatings against Si3N4 counterfaces revealed friction coefficients in the 0.06 - 0.15 range at T ~ 750 °C. Reduced friction coefficients were found in nanocomposite materials that contained primarily a AgTaO3 phase with a small amount of segregated Ag phase, as suggested by structural characterization using X-ray diffraction. The presence of nanoparticles of segregated Ag in the thin films further enhanced the performance of these materials by increasing their toughness. Additional characterization of the AgTaO3 films at 750 °C under normal loads of 1, 2, 5, or 10 N revealed that the friction monotonically increased as the load was increased. These results were complemented by molecular dynamics simulations, which confirmed the increase of friction with load. Further, the simulations support the hypothesis that this trend can be explained in terms of decreased presence of Ag clusters near the sliding surface and the associated decreased porosity. The results suggest that the relative amount of Ag in a TaN or Ta2O5 mastrix may be used to tune film performance for a given application.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2014

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Stone, D’Arcy S.
Contributors dc:contributor
  • Aouadi, Samir
  • Scharf, Thomas W.
  • Brostow, Witold, 1934-
  • Young, Marcus L.
  • Collins, Peter

Subjects

dc:subject × 9

Rights

dc:rights
Statement dc:rights
  • Public
  • Stone, D’Arcy S.
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
https://digital.library.unt.edu/ark:/67531/metadc700025/
ark: ark:/67531/metadc700025

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Stone, D’Arcy S.. Silver Tantalate: a High Temperature Tribological Investigation. University of North Texas, 2014. https://doi.org/10.12794/metadc700025