Back to search

University of North Texas

Spray Cooling with HFC-134a and HFO-1234yf for Thermal Management of Automotive Power Electronics

Abstract

dc:description

This study aims to experimentally investigate the spray cooling characteristics for active two-phase cooling of automotive power electronics. Tests are conducted on a small-scale, closed loop spray cooling system featuring a pressure atomized spray nozzle. Two types of refrigerants, HFC-134a (R-134a) and HFO-1234yf, are selected as the working fluids. The test section (heater), made out of oxygen-free copper, has a 1-cm2 plain, smooth surface prepared following a consistent procedure, and would serve as a baseline case. Matching size thick film resistors, attached onto the copper heaters, generate heat and simulate high heat flux power electronics devices. The tests are conducted by controlling the heat flux in increasing steps, and recording the corresponding steady-state temperatures to obtain cooling curves. The working fluid is kept at room temperature level (22oC). Performance comparisons are made based on heat transfer coefficient (HTC) and critical heat flux (CHF) values. Effects of spray characteristics and liquid flow rates on the cooling performance are investigated with the selected coolants. Three types of commercially available nozzles that generate full-cone sprays with fine droplets are utilized in the tests. Effect of liquid flow rate is evaluated varying flow rates at 2, 3, 4 ml/s. The experimental results obtained from this study provide a framework for spray cooling performance with the current and next-generation refrigerants aimed for advanced thermal management of automotive power electronics.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yaddanapudi, Satvik Janardhan
Contributors dc:contributor
  • Bostanci, Huseyin
  • Nasrazadani, Seifollah
  • Yu, Cheng

Subjects

dc:subject × 8

Rights

dc:rights
Statement dc:rights
  • Public
  • Yaddanapudi, Satvik Janardhan
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
https://digital.library.unt.edu/ark:/67531/metadc822762/
ark: ark:/67531/metadc822762

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yaddanapudi, Satvik Janardhan. Spray Cooling with HFC-134a and HFO-1234yf for Thermal Management of Automotive Power Electronics. University of North Texas, 2015. https://doi.org/10.12794/metadc822762