Back to search

University of North Texas

Investigation of Spray Cooling Schemes for Dynamic Thermal Management

Abstract

dc:description

This study aims to investigate variable flow and intermittent flow spray cooling characteristics for efficiency improvement in active two-phase thermal management systems. Variable flow spray cooling scheme requires control of pump input voltage (or speed), while intermittent flow spray cooling scheme requires control of solenoid valve duty cycle and frequency. Several testing scenarios representing dynamic heat load conditions are implemented to characterize the overall performance of variable flow and intermittent flow spray cooling cases in comparison with the reference, steady flow spray cooling case with constant flowrate, continuous spray cooling. Tests are conducted on a small-scale, closed loop spray cooling system featuring a pressure atomized spray nozzle. HFE-7100 dielectric liquid is selected as the working fluid. Two types of test samples are prepared on 10 mm x 10 mm x 2 mm copper substrates with matching size thick film resistors attached onto the opposite side, to generate heat and simulate high heat flux electronic devices. The test samples include: (i) plain, smooth surface, and (ii) microporous surface featuring 100 μm thick copper-based coating prepared by dual stage electroplating technique. Experimental conditions involve HFE-7100 at atmospheric pressure and 30°C and ~10°C subcooling. Steady flow spray cooling tests are conducted at flow rates of 2 - 5 ml/cm².s, by controlling the heat flux in increasing steps, and recording the corresponding steady-state temperatures to obtain cooling curves in the form of surface superheat vs. heat flux. Variable flow and intermittent flow spray cooling tests are done at selected flowrate and subcooling conditions to investigate the effects of dynamic flow conditions on maintaining the target surface temperatures defined based on reference steady flow spray cooling performance.

Degree

thesis:*
Grantor dc:publisher
University of North Texas
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yata, Vishnu Vardhan Reddy
Contributors dc:contributor
  • Bostanci, Huseyin
  • Huang, Zhenhua (Professor of structural engineering)
  • Zhange, Haifeng

Subjects

dc:subject × 14

Rights

dc:rights
Statement dc:rights
  • Public
  • Yata, Vishnu Vardhan Reddy
  • Copyright
  • Copyright is held by the author, unless otherwise noted. All rights Reserved.
Language dc:language
English

Identifiers

dc:identifier.*
Identifier
local-cont-no: submission_580
https://digital.library.unt.edu/ark:/67531/metadc984153/
ark: ark:/67531/metadc984153

Chain of custody

source
Harvested from
University of North Texas
Base URL
digital.library.unt.edu/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yata, Vishnu Vardhan Reddy. Investigation of Spray Cooling Schemes for Dynamic Thermal Management. University of North Texas, 2017. https://doi.org/10.12794/metadc984153