University of South Florida
Investigation of CoO ATO for Solar Cells and Infrared Sheaths
Abstract
dc:descriptionSolar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and alignment are tuned by changing the precursor solution's concentration, changing the fabrication parameters such as the 1. Voltage between needle tip and collector plate 2. Distance between needle tip and collector plate and 3. The flow rate of solution in the syringe pump. Physical or structural properties have been studied by using Scanning Electron Microscopy (SEM), Electron Dispersive Microscopy (EDS), Atomic Force Microscopy (AFM). Electrical characterization was carried out using a short circuit current- Voltage (J-V) and multimeter measurements.
Degree
thesis:*- Name thesis:degree_name
- Doctor of Philosophy (Ph.D.)
- Level thesis:degree_level
- Dissertation
- Discipline thesis:degree_discipline
- Electrical Engineering
- Grantor
- University of South Florida
- Year dc:date
- 2021
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Devisetty Subramanyam, Manopriya
- Contributors dc:contributor
-
- Sylvia Thomas, Ph.D.
- Arash Takshi, Ph.D.
- Andrew Hoff, Ph.D.
- Theressa Evans-Nguyen, Ph.D.
- Scott Campbell, Ph.D.
Subjects
dc:subject × 8Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.usf.edu/etd/9582