Back to search

University of South Florida

Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing

Abstract

dc:description

Packaging of an RF Beamforming IC was performed using an additive manufacturingplatform with FDM, microdispensing, laser subtractive manufacturing, and milling. The beamforming IC was embedded within a multilayer device structure in order to feed a 2x2 antenna sub-array in a compact and completely integrated package. Additive manufacturing allows for simple variation in material parameters and properties that enhances the ability to develop integrated system packaging. This study builds on previous investigations and demonstrates the ability to embed an active RF device with measurable gain within a printed plastic substrate. Critical to developing a repeatable method for this packaging solution, initial studies were made to characterize the materials used and to duplicate the structures and printing methods needed to fabricate the final device. The commercial-off-the-shelf beamforming IC uses mixed signal technology to allow for RF I/O and digital control to allow for phase shifting of the different channels. This chip also exhibits a dense array of pads as compared to other packaging solutions using additive manufacturing. Several steps are required to complete the testing including printing low loss, small width interconnects to address signal routing of printed RF and DC transmission lines. Due to the active devices on the beamforming IC, thermal management required changes to the initial design and altered antenna performance.

Degree

thesis:*
Name thesis:degree_name
MS in Electrical Engineering (M.S.E.E.)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical Engineering
Grantor
University of South Florida
Year dc:date
2021

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Murphy, Ryan
Contributors dc:contributor
  • Jing Wang, Ph.D.
  • Gokhan Mumcu, Ph.D.
  • Arash Takshi, Ph.D.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/9601

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Murphy, Ryan. Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing. Thesis thesis, University of South Florida, 2021. https://digitalcommons.usf.edu/etd/9601