Back to search

University of South Florida

Design of End Bent Piles for Downdrag

Abstract

dc:description

Embankments are commonly used for bridge approaches, with mechanically stabilized earth (MSE) walls being the preferred choice in Florida. However, the construction of embankments leads to the settlement of the underlying soil, regardless of soil type. When piles are driven before embankment construction, the initial settlement of the original soil creates relative movement between the pile and the surrounding soil, introducing frictional forces. When the existing soils move downward relative to the pile, a downward-oriented side shear known as downdrag is introduced. While downdrag is addressed in current codes and textbooks, it is often only briefly mentioned and primarily in the context of clay soils, with little to no mention of sandy soils. Additionally, current codes and textbooks lack comprehensive procedures and computations for incorporating downdrag into designs. Consequently, existing design aids, such as SPT97 and FB-Deep, do not account for downdrag in their calculations. This thesis aims to address this gap by investigating the design process of end bent driven piles with downdrag and proposes an Excel-based program for incorporating downdrag into pile design. The study involved compiling essential background information on downdrag, including soil settlement prediction models, pile capacity models, and implementation methods. The developed Excel program, Pile Embankment Assessment Tool (PEAT), integrates these downdrag considerations into the design process. Its effectiveness was tested through three case studies, by comparing the software’s predictions with field data from Sandridge Road, Paseo Al Mar Boulevard, and Henley Road bridge construction projects in Florida. Discrepancies between PEAT predictions and the measured data were analyzed, with variations attributed to uncertainties from thermal variations, soil profile improvements, and data bias. The study concludes that downdrag effects should be considered in the design of end bent piles, even in predominantly sandy soils, and recommends further research is needed to establish appropriate load factors to address variability and uncertainties in predictive efforts.

Degree

thesis:*
Name thesis:degree_name
MS in Civil Engineering (M.S.C.E.)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor
University of South Florida
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Frye, Tanna
Contributors dc:contributor
  • Gray Mullins, Ph.D.
  • Michael J. Stokes, Ph.D.
  • Zachary Haber, Ph.D.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/10619

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Frye, Tanna. Design of End Bent Piles for Downdrag. Thesis thesis, University of South Florida, 2024. https://digitalcommons.usf.edu/etd/10619