Back to search

University of South Florida

Comparing a Low-Volume Piezometer to Traditional Wells in Evaluating Hydraulic Lag Caused by Low-Permeability Sediments

Abstract

dc:description

Traditionally-constructed wells are commonly used to measure hydraulic head in all saturated systems, even in fine-grained sediments. Previous studies (Hvorslev 1951, Penman 1961) have shown that time lag in response to head changes between traditional wells and the surrounding fine-grained sediments can be a significant source of error. Time lag is caused by the time required for water to flow into or out of the well to reflect the appropriate change in head. A low-volume piezometer was constructed to measure changes in hydraulic head without requiring a change in fluid volume within the piezometer by directly measuring pore pressure in the surrounding sediments. The low-volume piezometer used a commercially-available pressure transducer that is hydraulically connected to the surrounding sediment by a porous-ceramic cylinder. The device is attached to a drive point that allows for quick insertion without creating excessive over-pressure so that equilibrium is achieved rapidly. The low-volume piezometer was inserted near traditionally-constructed wells in 3-4 m thick, saturated clay in west-central Florida. The low-volume piezometer was field tested to compare measured pore pressures with observed levels in traditionally-constructed wells. The comparison highlights any head difference between the two methods, and determines if there is a time lag between the two measurement methods and its magnitude. The low-volume piezometer was installed next to a traditionally-constructed well and heads in both wells were monitored for three months. Results show that the low-volume piezometer can take up to a month to reach equilibrium. Using Hvorslev's equations, traditionally-constructed wells have time lag of roughly 6 orders of magnitude greater than the low-volume piezometer. If this is correct, it could take up to 83,000 years for a traditionally-constructed well to reach equilibrium. However, when a trend analysis is performed on the hydrographs from the low-volume piezometer and the two traditional wells, the correlation coefficients are 0.95 and 0.96. The very strong correlation suggests that the low-volume piezometer and the traditional wells both respond similarly to changes in head. More field data need to be collected, but it appears that contrary to theory, time lag in traditionally-constructed wells may be negligible.

Degree

thesis:*
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Geology
Grantor
University of South Florida
Year dc:date
2008

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Spencer, John M
Contributors dc:contributor
  • Mark Stewart, Ph.D.
  • Charles Connor, Ph.D.
  • Mark Rains, Ph.D.

Subjects

dc:subject × 7

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/508

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Spencer, John M. Comparing a Low-Volume Piezometer to Traditional Wells in Evaluating Hydraulic Lag Caused by Low-Permeability Sediments. Thesis thesis, University of South Florida, 2008. https://digitalcommons.usf.edu/etd/508