University of South Florida
Design, Fabrication and Characterization of Thin-Film M-I-M Diodes for Rectenna Array
Abstract
dc:descriptionA Metal-Insulator-Metal (MIM) diode is a high frequency device used for energy harvesting purpose in the RECTENNA. The main objective of this thesis work is to design, fabricate and characterize a thin-film MIM diode. A key issue associated in this research work is the development MIM diode with nanometer thin insulator region. The reason for the development of MIM diode is to rectify a wide spectrum of AC signal to usable DC power. In this thesis work, a planar MIM diode with Aluminum/Aluminum-Oxide/Gold has been fabricated. The thickness of the insulator region obtained was about 3nm. The Metal and insulator depositions were done by sputtering and plasma oxidation, respectively. I-V Characteristics of the diode was measured by making use of in-house set-up and 70% of the devices on a single wafer yielded with better result. Most of the I-V curves obtained were highly non-linear and asymmetric. Based on the I-V measurement, the logarithmic derivative of I vs. V was plotted and the tunneling behavior was also observed.
Degree
thesis:*- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Electrical Engineering
- Grantor
- University of South Florida
- Year dc:date
- 2004
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Krishnan, Subramanian
- Contributors dc:contributor
-
- Elias K. Stefanakos, Ph.D.
- Shekhar Bhansali, Ph.D.
- Kenneth Buckle, Ph.D.
Subjects
dc:subject × 7Rights
- Language dc:language
- EN-US
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.usf.edu/etd/1119