Back to search

University of South Florida

Modeling of QE, I-V Characteristics of MSM (Metal-Semiconductor-Metal) Mercuric Iodide Thin Films with MEDICI<sup>TM</sup>

Abstract

dc:description

Mercuric Iodide is the most promising of all semiconductor materials currently under investigation for use as radiation detectors at room temperature. While substantial studies have been conducted on single crystal HgI2, polycrystalline HgI2 remains a comparatively less studied form. The HgI2 films are deposited on TEC-15 LOF glass with a Tin Oxide (SnO2) coating which acts as the growth surface and front contact. The back contact, Palladium (Pd), is deposited by sputtering through a shadow mask. The films are circular in shape with an approximate diameter of 2.5 cm and thicknesses ranging from 50-600 micro m. The film has seven contact points defined by Pd electrodes for spectral response(SR) and I-V measurements. Measurements were done on the film with a visible light source. Numerical modeling helps us understand device properties and processes that take place in operation of the device. The focus of this work was to identify loss mechanisms in photoresponse, reveal fundamental device properties, and develop a quantitative device model for MSM HgI2 thin films using the DC Device modeling simulation tool MEDICI ™. The values for input parameters were chosen from literatutheory and reasonable estimates. Comprehensive studies were performed to investigate the sensitivity of SR and light I-V characteristics to each input parameter. Surface&Bulk recombinations have been investigated in this thesis. A Single, homogeneous region with all possible combinations of carrier mobilities, surface and bulk recombination parameters was not able to explain completely the measured SR. A Two-region model with the first region (0-0.5) μ m being surface&bulk recombination dominated, and the second (0.5-300) μ m bulk recombination dominated, was able to match the complete measured SR of current devices. The key parameters determined from the simulations are the mobilities, bulk lifetimes and surface-recombination velocities at the front contact for both carriers. These are consistent with expectations based upon known single crystal properties

Degree

thesis:*
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical Engineering
Grantor
University of South Florida
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Rupavatharam, Vikram
Contributors dc:contributor
  • Don L. Morel, Ph.D.
  • Christos S. Ferekides, Ph.D.
  • Yun. L. Chiou, Ph.D.

Subjects

dc:subject × 7

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/1229

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Rupavatharam, Vikram. Modeling of QE, I-V Characteristics of MSM (Metal-Semiconductor-Metal) Mercuric Iodide Thin Films with MEDICI<sup>TM</sup>. Thesis thesis, University of South Florida, 2004. https://digitalcommons.usf.edu/etd/1229