Back to search

University of South Florida

Analysis of Glass Mold to Enhance Rate of Heat Transfer

Abstract

dc:description

Narrow Neck Press and Blow (NNPB) process is used to produce light weight bottles. The gob of molten glass is delivered to the blank mold and a specially designed narrow diameter plunger is used to form the finish or mouth and the parison as it presses upwards. Invert and final blow takes place followed by take-out and annealing. Anchor Glass Container Corp. (AGC) uses NNPB technology in their glass making plants. The problem experienced by AGC in the process is that the heat dissipation through out the mold is not uniform and hence there is a non uniform temperature distribution in the finished bottle extracted from it. Specifically the shoulder region of the bottle stays at a higher temperature when compared with the other regions, becoming the limiting factor in determining the rate of bottle production. Excessive temperatures in any region leave the glass insufficiently rigid, allowing the bottle to sag or lean. An increased rate of production which demands faster and effective cooling of the bottle is desired and is the ultimate goal of this research effort. This problem can be effectively solved by increasing the amount of heat transferred from the mold to the cooling air, which can be done by increasing the surface area of the cooling passages. A mathematical model for calculating the amount of heat transferred to the cooling air is proposed in this thesis. The air properties at the exit of the mold and the amount of heat transferred by each cooling passage were obtained by using MATHCAD. A 2 dimensional numerical simulation for the final molding was carried out using ANSYS and the temperature distribution for the mold and glass were obtained.

Degree

thesis:*
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Warude, Anand
Contributors dc:contributor
  • R. A. Crane, Ph.D.
  • Thomas Eason, Ph.D.
  • Glenn Besterfield, Ph.D.
  • S. C. Kranc, Ph.D.

Subjects

dc:subject × 5

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/1293

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Warude, Anand. Analysis of Glass Mold to Enhance Rate of Heat Transfer. Thesis thesis, University of South Florida, 2004. https://digitalcommons.usf.edu/etd/1293