Back to search

University of South Florida

Heat Transfer Enhancement of Spray Cooling with Nanofluids

Abstract

dc:description

Spray cooling is a technique for achieving large heat fluxes at low surface temperatures by impinging a liquid in droplet form on a heated surface. Heat is removed by droplets spreading across the surface, thus removing heat by evaporation and by an increase in the convective heat transfer coefficient. The addition of nano-sized particles, like aluminum or copper, to water to create a nanofluid could further enhance the spray cooling process. Nanofluids have been shown to have better thermophysical properties when compared to water, like enhanced thermal conductivity. Although droplet size, velocity, impact angle and the roughness of the heated surface are all factors that determine the amount of heat that can be removed, the dominant driving mechanism for heat dissipation by spray cooling is difficult to determine. In the current study, experiments were conducted to compare the enhancement to heat transfer caused by using alumina nanofluids during spray cooling instead of de-ionized water for the same nozzle pressure and distance from the heated surface. The fluids were sprayed on a heated copper surface at a constant distance of 21 mm. Three mass concentrations, 0.1%, 0.5%, and 1.0%, of alumina nanofluids were compared against water at three pressures, 40psi, 45psi, and 50psi. To ensure the suspension of the aluminum oxide nanoparticles during the experiment, the pH level of the nanofluid was altered. The nanofluids showed an enhancement during the single-phase heat transfer and an increase in the critical heat flux (CHF). The spray cooling heat transfer curve shifted to the right for all concentrations investigated, indicating a delay in two-phase heat transfer. The surface roughness of the copper surface was measured before and after spray cooling as a possible cause for the delay.

Degree

thesis:*
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Martinez, Christian David
Contributors dc:contributor
  • Frank Pyrtle III, Ph.D.
  • Muhammad M. Rahman, Ph.D.
  • Craig Lusk, Ph.D.

Subjects

dc:subject × 7

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/2085

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Martinez, Christian David. Heat Transfer Enhancement of Spray Cooling with Nanofluids. Thesis thesis, University of South Florida, 2009. https://digitalcommons.usf.edu/etd/2085