Back to search

University of South Florida

Micro- and Nano-Scale Switches and Tuning Elements for Microwave Applications

Abstract

dc:description

In this work, various components for low power RF telemetry applications have been investigated. These designed, fabricated and tested devices include radio frequency (RF) micro-electro-mechanical systems (MEMS) switches, single-pole-double-throw (SPDT) RF MEMS switches, nano fabricated capacitors and switching devices, and micromachined microstrip patch antennas.Coplanar waveguide (CPW) RF capacitive switches in shunt and series configuration were designed for high isolation, low insertion loss, and fast switching speed. Switches with > 35 dB isolation, < 0.3 dB insertion loss and switching speeds in the 10's of microseconds were fabricated and measured. These switches were packaged using photo-imagable resists and flip-chip bonding techniques. The MEMS shunt switch topology was also implemented into a single-pole-double-throw (SPDT) design by utilizing two such switches in a series and a shunt configuration, offset by a quarter wavelength section to provide a RF shor t at the input of the shunt switch in the off state. This type of design has the advantage of requiring a simple on-off (0 V and 35 V) bias supply to select the switch state.Also, the use of a focused ion beam (FIB) tool to mill sub-micron gaps in CPW transmission line structures was investigated. Nearly ideal capacitors in the micro- and mm- frequency range with capacitance of 8-12 fF were obtained using this milling technique. The FIB's capability to mill such small gaps at an oblique angle was also utilized to fabricate RF nano switches. These devices were switched with speeds of less than 300 ns with voltages of less than 20 V. Finally, solid state and packaged MEMS switches were integrated into a novel binary amplitude shift keyed (BASK) modulating RF telemetry system to provide the modulation of a redirected 10 GHz continuous wave (CW) signal. A pair of cross-polarized micromachined microstrip patch antennas was used in the system to receive the CW signal and re-transmit th e modulated signal. A transmission range of over 25 m was demonstrated with the solid state switch reflectenna.

Degree

thesis:*
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Electrical Engineering
Grantor
University of South Florida
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ketterl, Thomas P
Contributors dc:contributor
  • Thomas Weller, Ph.D.
  • Lawrence Dunleavy, Ph.D.
  • Shekhar Bhansali, Ph.D.
  • Ashok Kumar, Ph.D.
  • David Fries, M.S.

Subjects

dc:subject × 7

Rights

Language dc:language
EN-US

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/2583

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ketterl, Thomas P. Micro- and Nano-Scale Switches and Tuning Elements for Microwave Applications. Dissertation thesis, University of South Florida, 2006. https://digitalcommons.usf.edu/etd/2583