Back to search

University of South Florida

Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices

Abstract

dc:description

The work and results presented in this dissertation concern two complimentary studies that are rooted in surface acoustic waves and transducer study. Surface acoustic wave devices are utilized in a variety of fields that span biomedical applications to radio wave transmitters and receivers. Of interest in this dissertation is the study of surface acoustic wave interaction with polydimethylsiloxane. This material, commonly known as PDMS, is widely used in the microfluidic field applications in order to create channels for fluid flow on the surface of a piezoelectric substrate. The size, and type of PDMS that is created and ultimately etched on the surface of the substrate, plays a significant role in its operation, chiefly in the insertion loss levels experienced. Here, through finite element analysis, via ANSYS® 15 Finite Element Modeling software, the insertion loss levels of varying PDMS sidewall channel dimensions, from two to eight millimeters is investigated. The simulation is modeled after previously published experimental data, and the results demonstrate a clear increase in insertion loss levels with an increase in channel sidewall dimensions. Analysis of the results further show that due to the viscoelastic nature of PDMS, there is a non -linear increase of insertion loss as the sidewall dimensions thicken. There is a calculated variation of 8.31 decibels between the insertion loss created in a microfluidic device with a PDMS channel sidewall thickness of eight millimeters verse a thickness of two millimeters. Finally, examination of the results show that insertion loss levels in a device are optimized when the PDMS sidewall channels are between two and four millimeters. The second portion of this dissertation concerns the calibration of an ultrasonic transducer. This work is inspired by the need to properly quantify the signal generated by an ultrasonic transducer, placed under a static loading condition, that will be used in measuring ultrasonic bone conducted frequency perception of human subjects. Ultrasonic perception, classified as perception beyond the typical hearing limit of approximately 20 kHz, is a subject of great interest in audiology. Among other reasons, ultrasonic signal perception in humans is of interest because the mechanism by which either the brain or the ear interprets these signals is not entirely understood. Previous studies have utilized ultrasonic transducers in order to study this ultrasonic perception; however, the calibration methods taken, were either incomplete or did not properly account for the operation conditions of the transducers. A novel transducer calibration method is detailed in this dissertation that resolves this issue and provides a reliable means by which the signal that is being created can be compared to the perception of human subjects.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Padilla, Scott T.
Contributors dc:contributor
  • Rasim Guldiken, Ph.D.
  • Nathan Crane, Ph.D.
  • David Eddins, Ph.D.
  • Jose Porteiro, Ph.D.
  • Jing Wang, Ph.D.

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/6922

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Padilla, Scott T.. Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices. Dissertation thesis, University of South Florida, 2017. https://digitalcommons.usf.edu/etd/6922