Back to search

University of South Florida

Construction Effects on the Side Shear of Drilled Shafts

Abstract

dc:description

Design methods for side shear of drilled shafts, including the resistance factors that should be applied, do not account for any specific construction procedure. Instead, design often relies on analysis of case studies which include all construction methods used in each geomaterial type (e.g. clays, sands and rocks), or on parametric analysis. Nonetheless, literature suggests that different construction procedures result in varying side shear. This research investigated 2 types of construction: (1) slurry stabilization in sandy soils using bentonite and polymer products that are commonly used on the field, with exposure times from near 0h to 96h, and (2) temporary casing stabilization in simulated limestone using 3 different methods for installation and extraction of the casings which included: driven, coarse-tooth rotated and fine-tooth rotated. All specimens were 1/10th scale in relation to the most common shafts sizes constructed in the field. The results showed that bentonite slurry causes a significant reduction on the side shear within relatively short periods of time (between 2h and 4h of open excavation), whereas polymer slurry did not show appreciable variations up to 96h. The driven and coarse-tooth rotated temporary casing exhibited lower side shear resistance than the fine-tooth rotated casings, which can be attributed to the larger annulus outside the casing and the additional crumbled pieces of rock that degrades the contact interface with the socket concrete. Construction-based resistance factors are suggested for each construction procedure investigated in this study and clearly show the effects from different methods.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor
University of South Florida
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Caliari De Lima, Lucas
Contributors dc:contributor
  • Austin G. Mullins, Ph.D.
  • Rajan Sen, Ph.D.
  • Michael J. Stokes, Ph.D.
  • Ryan Toomey, Ph.D.
  • Sarah Kruse, Ph.D.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/7004

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Caliari De Lima, Lucas. Construction Effects on the Side Shear of Drilled Shafts. Dissertation thesis, University of South Florida, 2017. https://digitalcommons.usf.edu/etd/7004