Back to search

University of South Florida

Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution

Abstract

dc:description

Additive manufacturing involves the layer-wise patterned addition of material to create 3D parts, allowing for parts with complex geometries that traditional subtractive manufacturing processes cannot create, while offering good value for low run production parts by eliminating the cost of tooling. Large Area Sintering is a form of powder based additive manufacturing where entire layer cross sections are heated and fused in a single continuous exposure process. This layer by layer powder sintering process is similar to selective laser sintering, but by heating the cross section at a slower and controllable rate there is an opportunity to achieve tighter control over thermal history. This thesis discusses the design, construction, and validation of a large area sintering test platform, as well as a preliminary study on feature resolution. A key component of this system was the integration of an infrared camera, allowing point-wise temperature control of the sintering cross section. There is a hypothesis that longer and controlled heating rates in Large Area Sintering (in comparison to Selective Laser Sintering) would allow the capability to process a wider range of materials, and give more control over the resulting final part properties. The test platform created a repeatable test environment, and successfully demonstrated the capability for point wise temperature control of the sintering cross section, enabling the ability to examine the effects of slower controlled heating rates. Available power on the system was 2.22 W/cm2 for heating, with a temperature control loop time of 160 – 180 ms. The results of the preliminary study on feature resolution also suggested a positive correlation between point wise closed loop temperature control and improved feature resolution, giving motivation for further study.

Degree

thesis:*
Name thesis:degree_name
MS in Mechanical Engineering (M.S.M.E.)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gardiner, Christopher J.
Contributors dc:contributor
  • Nathan B. Crane, Ph.D.
  • David Murphy, Ph.D.
  • Tansel Yucelen, Ph.D.

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/7026

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gardiner, Christopher J.. Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution. Thesis thesis, University of South Florida, 2017. https://digitalcommons.usf.edu/etd/7026