Back to search

University of South Florida

Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces

Abstract

dc:description

Magnesium and its alloys are good candidates to manufacture medical implants. They have excellent biocompatibility and because they biodegrade secondary surgical operation to remove the implant could be eliminated. However, in aqueous environments, magnesium alloys rapidly corrode, resulting in premature degradation of the implant along with biologically intolerable hydrogen gas generation. In literature, there are multiple studies focused on creating water repelling hydrophobic magnesium surfaces in order to decrease corrosion rates. Hydrophobic properties can be achieved by creation of a roughness profile on an initially smooth surface combined with a treatment that reduces the free surface energy. In theory, hydrophobic surfaces yield an undisturbed gas layer over the surface which acts as a protective barrier against corrosion in submerged conditions. However, studies in literature have not investigated the mechanism behind increased corrosion protection that comes with hydrophobic surfaces nor the influence of series of processes used to create hydrophobic surfaces on corrosion behavior. In this study, pillar shaped microstructure patterns were fabricated on smooth pure magnesium surfaces by picosecond laser ablation. Some micropatterned samples were further processed by stearic acid modification (SAM). Micropatterned surfaces with SAM had hydrophobic properties with water droplet contact angles higher than 130°, while the micropatterned surfaces without SAM remained hydrophilic. Corrosion properties of all hydrophobic and hydrophilic magnesium surfaces were investigated using electrochemical impedance spectroscopy (EIS) in saline solution. Compared to smooth unmodified surfaces, significantly improved and similar corrosion resistances were observed on both hydrophobic and hydrophilic surfaces. Corrosion rate reduction on micropatterned hydrophilic/phobic surfaces was also verified by prolonged submersion tests in saline solution. Unexpected corrosion inhibition on hydrophilic surfaces was investigated and evidence of local alkalization near microstructures was found. It was concluded that corrosion inhibiting mechanism for hydrophilic surfaces is possibly being caused by local alkalization and the resulting stabilization of Mg(OH)2 layer. This is different than the mechanism behind hydrophobic surfaces’ corrosion resistance, which makes use of gas adhesion at the liquid solid interface as once more verified in this study along with previous studies in literature.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Mechanical Engineering
Grantor
University of South Florida
Year dc:date
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Yayoglu, Yahya Efe
Contributors dc:contributor
  • Nathan B. Gallant, Ph.D.
  • Nathan D. Crane, Ph.D.
  • Ryan Toomey, Ph.D.
  • Alberto A. Sagues, Ph.D.
  • Matthias Batzill, Ph.D.

Subjects

dc:subject × 12

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.usf.edu/etd/8314

Chain of custody

source
Harvested from
University of South Florida
Base URL
digitalcommons.usf.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Yayoglu, Yahya Efe. Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces. Dissertation thesis, University of South Florida, 2020. https://digitalcommons.usf.edu/etd/8314