Back to search

Hosted by Utah State University Libraries

Modeling, Designing, Fabricating, and Testing of Channel Panel Flat Plate Heat Pipes

Abstract

dc:description.abstract

Flat plate heat pipes are very efficient passive two-phase heat transport devices. Their high efficiency and low mass are desirable in the aerospace and electronics industries. The highly competitive nature of the thermal management industry results in little awareness of the capabilities of at plate heat pipes, which has resulted in only a few applications of the technology. In the year 2000 a research and development project sponsored by Space Dynamics Laboratory was launched to investigate building carbon-based at heat pipes. The flat configuration is desireable to incorporate many components onto one thermal management system. Development led to the adoption of the term "Channel Panel" because of the orthogonal grid of channels used as the capillary structure. Work to date has verified the utility and basic function of this technology but has not resulted in a standard method for the design and fabrication of channel panels. This study investigates and evaluates currently available and relevent models useful for the design of channel panels, investigates issues with fabrication, and makes suggestions for future development. Shallow pool boiling is shown to be an appropriate model for the critical heat flux of boiling in at plate heat pipes and provides a means for estimating the convective heat transfer coefficient. Previous work by Neal Hubbard is modified and shown to accurately couple the geometry and operating limits of a channel panel. Experiments verify the analytical predictions of these models. Issues in the fabrication of channel panels are reported as well as standard procedures for cleaning and filling. The final result is a standard method for the initial design phase of channel panel at plate heat pipes.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Harris, James R
Contributors dc:contributor
  • Leijun Li
  • J. C. Batty
  • Byard Wood

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Harris, James R. Modeling, Designing, Fabricating, and Testing of Channel Panel Flat Plate Heat Pipes. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/21