Back to search

Hosted by Utah State University Libraries

Demonstration of a Completely Described Swirling Jet Experiment Used for Numerical Validation

Abstract

dc:description.abstract

This thesis demonstrates the standard for the design of an experimental model to be used for numerical validation purposes. It is proposed that numerical models may be assessed more accurately and directly by validation with a completely described experimental model, consisting of accurate descriptions of the operating conditions, fluid properties, and experimental uncertainties. This idea is demonstrated using an experimental model of a swirling jet at three Reynolds numbers (Re = 550, 2560, and 3650), with vortex breakdown existing in the higher two Reynolds number cases. Measurements of the swirling jet were obtained at two locations upstream of the jet exit with the intent to provide the flow profiles to the numerical model and four downstream locations used to assess the accuracy of the model. Numerical simulations using the laminar model and k – ϵ, k – ω, and k – ϵ – v2 – f turbulence models were used for turbulence closure. Detached Eddy Simulation (DES) and Reynolds-stress model results were also obtained to demonstrate unsteady numerical solutions. The results of the experimental and numerical models are compared to understand the influence on validation using a completely described experimental model.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wilson, Brandon M.
Contributors dc:contributor
  • Barton L. Smith
  • Robert Spall
  • Heng Ban

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wilson, Brandon M.. Demonstration of a Completely Described Swirling Jet Experiment Used for Numerical Validation. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/454