Back to search

Hosted by Utah State University Libraries

Measurements of the Temperature Dependence of Radiation Induced Conductivity in Polymeric Dielectrics

Abstract

dc:description.abstract

Radiation Induced Conductivity (RIC) is the change in conductivity of a material due to bombardment from incident high energy radiation. This study is to determine the effect of RIC and RIC's temperature dependence in polymeric dielectrics, specifically Kapton HN, Kapton E, PTFE Teflon, Tefzel, and Low Density Polyethylene (LDPE). Interest in these materials arises from applications for use in future spacecraft, specifically the James Webb Space Telescope (JWST). One major issue in the design of JWST, as in all spacecraft, is the charging and arcing of exposed materials, resulting in fatal damage to the electronics and/or the craft itself. Particles prevalent in space environments bombard spacecraft, resulting in charge deposition. The electric field within the bombarded sample increases over time, finally resulting in a high enough potential difference to cause arcing from high potential surfaces to low potential surfaces. One possibility of avoiding such serious occurrences is charge dissipation due to the effect of RIC, σRIC. A broad experimental program to study the RIC of polymeric dielectric materials has been performed by the Materials Physics Group at Utah State University. The project studied a set of approximately twelve materials to be used in the construction of the James Webb Space Telescope. Extensive instrumentation was designed, built, and tested. Characterization measurements were carried out at USU and three experimental runs were performed at the Idaho Accelerator Center (IAC) to measure the RIC of these materials. RIC measurements were taken at the Idaho Accelerator Center in Pocatello, Idaho using a monoenergetic 4 MeV electron beam. Dose rates ranging from 0.01 rad/sec to 10.0 rad/sec were used. A voltage of approximately 50% of breakdown was applied across the samples, and resulting currents were measured to determine the conductivity. The change in conductivity at each dose rate was calculated and plotted on a log-log scale. Values for the kRIC and Δ material parameters were obtained from fits to the data. Data were also taken at ~113K, 219K, 234.5K, 296.5K, and 333K for temperature-dependent resistivity comparisons.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Physics
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gillespie, Jodie Corbridge
Contributors dc:contributor
  • J. R. Dennison
  • D. Mark Riffe
  • David Peak

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gillespie, Jodie Corbridge. Measurements of the Temperature Dependence of Radiation Induced Conductivity in Polymeric Dielectrics. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/1953