Back to search

Hosted by Utah State University Libraries

Effect of Manufacturing Processes on the Loss Factor and Other Mechanical Properties of Kenaf Fiber-Reinforced Composites

Abstract

dc:description.abstract

The characteristics essential for manufacturing parts and products are not well known for natural fiber-reinforced composite materials. Natural fibers display properties similar to glass fibers, and present a more environmentally friendly option for manufacturing composite materials. This research investigates various parameters in the manufacture of kenaf fiber-reinforced composites including cure time, density, matrix hardener ratio, surface treatment, and fiber length and examines the effect they have on mechanical properties of the composite material. Several samples were created and subjected to a vibrational test. Using known relationships, mechanical properties were extracted from the test results. Samples were found to exhibit repeatable mechanical properties after approximately 150 hours following removal from the oven. Increasing the pressure applied during the cure cycle results in higher densities, which increases damping and stiffness. The matrix hardener ratio also affects these properties in a similar way. High hardener ratios result in a more brittle material that dampens less but generally has a higher stiffness. Testing showed that chemically treated fibers exhibit higher amounts of damping. Fiber length was also tested, though the effect was less prominent.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Spackman, Brian P.
Contributors dc:contributor
  • Thomas Fronk
  • Ling Liu
  • Jason Quinn

Subjects

dc:subject × 13

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Spackman, Brian P.. Effect of Manufacturing Processes on the Loss Factor and Other Mechanical Properties of Kenaf Fiber-Reinforced Composites. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/4256