Back to search

Hosted by Utah State University Libraries

Investigating the Effect of Capping Layers on Final Thin Film Morphology After a Dewetting Process

Abstract

dc:description.abstract

Nanoparticles on a substrate have numerous applications in nanotechnology, from enhancements to solar cell efficiency to improvements in carbon nanotube growth. Producing nanoparticles in a cheap fashion with some control over size and spacing is difficult to do, but desired. This work presents a novel method for altering the size and spacing of nickel and gold nanoparticles. Dewetting is a methodology to reduce thin films to an ensemble of discrete droplets. The introduction of alumina capping layers to thin nickel films during a pulsed laser-induced dewetting process has yielded reductions in the mean and standard deviation of radii and pitch for dewet nanoparticles with no noticeable difference in final morphology with increased capping layer thickness. The differences in carbon nanotubes grown on these samples is also presented here, with a much thicker matrix being present for the capped case. The same capping layers have produced an opposite effect of increased nanoparticle size and spacing during a solid state dewetting process of a gold film. These results also show a decrease in the magnitude of the effect as the capping layer thickness increases. Since the subject of research interest for using these nanoparticles has shifted towards producing ordered arrays with size and spacing control, the uncertainty in the values of these distributions needs to be quantified for any form of meaningful comparison to be made between traditional nanoparticle fabrication methods and alternate fabrication methods that are being used to alter the final characteristics of the nanoparticles. Here, we also present a first step in the uncertainty analysis of such samples via synthetic images producing error distributions.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • White, Benjamin C.
Contributors dc:contributor
  • Nicholas Roberts
  • Ling Liu
  • Jason Quinn

Subjects

dc:subject × 2

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

White, Benjamin C.. Investigating the Effect of Capping Layers on Final Thin Film Morphology After a Dewetting Process. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/4957