Hosted by Utah State University Libraries
Production of Phenol-Formaldehyde Adhesives from Catalytic Pyrolysis Oil
Abstract
dc:description.abstractPhenol-formaldehyde adhesives conventionally synthesized from fossil fuel resources pose two major concerns: sustainability issues and environmental concerns. The sustainability issues arise from the inevitable depletion of fossil fuel resources whilethe environmental concerns, primarily, stem from the emission of volatile organic compounds. Thus, opting for alternative raw materials from renewable resources reduces the dependence on fossil fuels as well as promote the production of environmentally-friendly products. The successful commercialization of bio-adhesives requires that the substitution of phenol with bio-oil during resin synthesis should be above 40%. In this study, catalytic pyrolysis oil produced from pinyon-juniper biomass and red mud alumina catalyst was used to synthesize phenolic resins. Also, the influence of adhesive synthesis parameters on the degree of phenol substitution with pinyon-juniper bio-oil, the strength of adhesives, and the concentration of free formaldehyde and free phenol contents were examined. Phenol was successfully substituted with 80% pinyon-juniper bio-oil. The adhesive strengths of pinyon-juniper substituted adhesives were comparable to theadhesive strengths obtained for pure phenol-formaldehyde adhesives. The phenol concentrations of pinyon-juniper substituted adhesives were observed to be lower in comparison to pure phenol-formaldehyde adhesives.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Biological Engineering
- Grantor dc:publisher
- Hosted by Utah State University Libraries
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Akude, Angela M.
- Contributors dc:contributor
-
- Foster Agblevor
- Ronald Sims
- Yujie Sun