Hosted by Utah State University Libraries
Wireless Power Transfer Roadway Integration
Abstract
dc:description.abstractElectric vehicles represent a major accomplishment in the energy and transportation industry. Unfortunately, they are restricted to a small travel range because of limited battery life. Successful integration of wireless power transfer (WPT) systems into the infrastructure would remove the range restrictions of EVs. To successfully integrate this technology, several requirements must be met. First, the embedment process cannot interfere with the electrical performance of the inductive power transfer (IPT) system. Second, the presence of the IPT system in the pavement structure cannot negatively affect the roadway’s lifespan. Several systems were directly embedded in roadway materials. The electrical properties of the systems were monitored during the embedment process. Then modifications were made to the IPT systems to optimize the embedment process. These modifications were then applied to a full scale IPT system which is being used to dynamically charge EVs. To test the structural performance of the systems, tensile stresses were applied to the pads to simulate traffic loading conditions. These tensile stresses were applied under cyclic loading conditions to simulate fatigue conditions found in roadways. The number of cycles, and stress at failure was recorded an analyzed. The electrical properties of the IPT pads was also measured and analyzed during the fatigue loading conditions.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
- Grantor dc:publisher
- Hosted by Utah State University Libraries
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Gardner, Trevor
- Contributors dc:contributor
-
- Marvin W. Halling
- Marc Maguire
- Ziqi Song