Back to search

Hosted by Utah State University Libraries

Additively-Manufactured Hybrid Rocket Consumable Structure for CubeSat Propulsion

Abstract

dc:description.abstract

Three-dimensional, additive printing has emerged as an exciting new technology for the design and manufacture of small spacecraft systems. Using 3-D printed thermoplastic materials, hybrid rocket fuel grains can be printed with nearly any cross-sectional shape, and embedded cavities are easily achieved. Applying this technology to print fuel materials directly into a CubeSat frame results in an efficient, cost-effective alternative to existing CubeSat propulsion systems. Different 3-D printed materials and geometries were evaluated for their performance as propellants and as structural elements. Prototype "thrust columns" with embedded fuel ports were printed from a combination of acrylonitrile utadiene styrene (ABS) and VeroClear, a photopolymer substitute for acrylic. Gaseous oxygen was used as the oxidizer for hot-fire testing of prototype thrusters in ambient and vacuum conditions. Hot-fire testing in ambient and vacuum conditions on nine test articles with a combined total of 25 s burn time demonstrated performance repeatability. Vacuum specific impulse was measured at over 167 s and maximum thrust of individual thrust columns at 9.5 N. The expected ΔV to be provided by the four thrust columns of the consumable structure is approximately 37 m/s. With further development and testing, it is expected that the consumable structure has the potential to provide a much-needed propulsive solution within the CubeSat community with further applications for other small satellites.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical and Aerospace Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chamberlain, Britany L.
Contributors dc:contributor
  • Stephen Whitmore
  • David Geller
  • Charles Swenson

Subjects

dc:subject × 6

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chamberlain, Britany L.. Additively-Manufactured Hybrid Rocket Consumable Structure for CubeSat Propulsion. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/7285