Back to search

Hosted by Utah State University Libraries

Pressure Loss Coefficients for Large Mitered Elbows with Diameters Ranging from 36-inches to 144-inches

Abstract

dc:description.abstract

When designing a pipeline system, it is important to understand the pressure losses that will occur within the system. One common source of pressure loss is from elbow pipe fittings. There is extensive research available for pressure loss coefficients of elbow pipe fittings, but the research is derived from elbows with relatively smaller pipe diameters. The purpose of this research is to investigate pressure losses associated with larger diameter mitered elbows (36-inches to 144-inches). The dimensions for all mitered elbows considered in this research follow ANSI/AWWA C208-17 recommendations (AWWA 2017). Due to the large size of the mitered elbows of interest, physical testing was not feasible for this research. Therefore, this research used numerical methods to determine the pressure loss coefficients of large mitered elbows, reducing mitered elbows, and expanding mitered elbows. The results suggest a strong correlation that the pressure loss for large mitered elbows, presented in this research, are solely dependent on the pipe Reynolds number. The reducing and expanding mitered elbows showed the pressure loss coefficient is dependent on Reynolds number and the percent of reduction/expansion of the elbow. Tabulated data, graphical data, and recommended equations are presented to determine pressure loss for large mitered elbows, reducing mitered elbows, and expanding elbows.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Civil and Environmental Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Coombs, Hayden J.
Contributors dc:contributor
  • Michael C. Johnson
  • Steven L. Barfuss
  • Marv W. Halling

Subjects

dc:subject × 5

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Coombs, Hayden J.. Pressure Loss Coefficients for Large Mitered Elbows with Diameters Ranging from 36-inches to 144-inches. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/7426