Back to search

Hosted by Utah State University Libraries

High-Isolation Antenna Technique for CubeSat-Borne, Continuous-Waveform Radar

Abstract

dc:description.abstract

Radar is important in target tracking, imaging, and weather prediction applications. As technology is increasingly miniaturized, there is a push for smaller radar. Research and exploration in outer space also benefit from small, low-power technologies. The NASA Jet Propulsion Laboratory’s RainCube was the first successful CubeSat-borne radar. A CubeSat is a type of small satellite that conforms to specific size and weight standards. Radar technology benefits from additional research on how to further miniaturize radar payloads. Integrating the transmit and receive antennas on the solar panels removes the need for antenna-deployment mechanisms, preserving space on the CubeSat. This thesis also demonstrates that implementing a radar that transmits and receives continuously and simultaneously (continuous-waveform) on the CubeSat improves the sensitivity, size, weight, and power consumption of the radar. Continuous-waveform radar suffers from self-interference because the transmitter and receiver are on at the same time. To overcome the self-interference, the transmitter and receiver must be isolated. Physically separating the antennas helps provide the isolation required for continuous-waveform radar, but is limited by the small size of the CubeSat. Isolation can be further increased by designing the antennas with opposite circular polarizations. The interfering signal traveling directly between the antennas has a different polarization than the receive antenna is designed for, so the interference is suppressed. The signal that hits a target reflects with the opposite circular polarization, so when it arrives at the receiver it has the proper polarization, so it is not suppressed. Combining physical-separation and different-polarization isolation enables a novel solution to implement a continuous-waveform radar on a small platform like a CubeSat.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Electrical and Computer Engineering
Grantor dc:publisher
Hosted by Utah State University Libraries

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Voigt, Logan E.
Contributors dc:contributor
  • Reyhan Baktur
  • Charles Swenson
  • Bryan Willis

Subjects

dc:subject × 7

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
Utah State University
Base URL
digitalcommons.usu.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Voigt, Logan E.. High-Isolation Antenna Technique for CubeSat-Borne, Continuous-Waveform Radar. Thesis thesis, Hosted by Utah State University Libraries, https://digitalcommons.usu.edu/etd/8500